Additional Features - LG A4UH306FA0 Owner's Manual

Additional features

Additional features
Sleep Mode
1. Press the Sleep Mode Auto button to set the time
you want the unit to turn off automatically.
1. The Timer is programmed in one-hour increments
by pressing the Sleep Mode Auto button 1 to 7
times.
The sleep mode is available for 1 to 7 times.
To alter the time period in steps of 1 hour, press
the Sleep Mode Button while aiming at air
conditioner.
3. Make sure the Sleep Mode Auto LED lights up.
Setting the Time
1. Time can be set only when you have pressed the
Reset button. If you have just replaced the
batteries, the Reset button should be pressed to
reset the time.
Press the Start/Stop button.
2. Press 2 nd F button
and check if 2 nd F icon is on.
Delay Start/Pre-Set Stop
1. Make sure the time is set correctly on the
Remote Controller display.
2. Press 2 nd F button.
3. Press the ON/OFF Timer
buttons to turn Timer on or off.
4. Press the Time Setting
buttons until the desired
time is set.
NOTICE
Select one of the following four types of operation.
Delay OFF Timer
18 Multi Type Air Conditioner
ON OFF
Delay ON Timer
To cancel the Sleep Mode, press the sleep
Mode Auto button several times until the star
( ) disappears from the operation display.
NOTICE
The Sleep Mode will be operated
at low fan speed (cooling) or medium fan
speed (heat pump only) for quiet sleeping.
IN COOLING MODE: The temperature will
automatically rise by 1°C over the next 30
minutes and by 2°C in 1 hour for comfortable
sleeping.
3. Press the Time Setting buttons until the desired
time is set.
4. Press the Timer SET button.
NOTICE
Check the indicator for A.M. and
P.M.
5. Press the selected on/off setting by
pressing the Timer SET button while
aiming the Remote Controller at the signal
receptor.
To cancel the setting the timer.
Press the Timer Cancel button while
CANCEL
aiming Remote Controller at the signal
SET
receptor.
(The timer lamp on the air conditioner and
the display will go out.)
with the unit running
Delay OFF and ON Timer
CANCEL
SET
CANCEL
SET
Delay ON and OFF Timer