Do you have a question about the FP050 and is the answer not in the manual?
Questions and answers
Summary of Contents for Emed FP050
Page 1
FOOD PROCESSOR FP050 Instructions for Use Please read before use these instructions and keep them for future reference.
Page 2
SAFETY WARNINGS ATTENTION! • This unit is designed as a “food processor for domestic use”; any other use is to be considered inappropriate and therefore dangerous. • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and...
Page 3
• After having removed the appliance from its packaging, ensure that it is intact and that there is no visible damage. When in doubt, do not use the appliance and only contact technically competent personnel or retailers. • Never switch the appliance on without having filled the tank with the required quantity of water •...
Page 5
LEGEND A. Cap B. Food basket C. Jar D. Blade group E. Steam chamber F. Water tank G. Cable H. Knob INSTRUCTIONS FOR USE PRELIMINARY OPERATION 1.Position the appliance on a flat surface 2.Make sure the switch is in the central position (OFF) 3.Remove the jar (C) by turning it in anticlockwise from its handle (Pic.2), open the cap (A) by turning it from its handle in anticlockwise (Pic.3) and put the raw food in the basket (Pic.4) (the total weight of all ingredients must be maximum...
Page 6
11.Turn the knob (H) in anticlockwise and start blending the food, every blending operation take 10 seconds. Repeat this process several times until the food reaches the desired consistency, suggested cycle for warm food 5 cycles, suggested cycle for raw food 3 cycle. 12.Warning: wait 10 seconds between one blending and another.
Page 7
2) Check that the switch is in the right position (switched on the right) 3) Check that all the plastic parts are in the right position, especially the cap TECHNICAL FEATURES MOD. FP050 Nominal voltage: 220-240V~ 50/60Hz Absorbed power: Boiler 380-420W Blender 130W Blender operating cycles: 10sec ON –...
Page 8
CE Conformity: This Food processor – ELY Mod FP050 complies with all the essential requirements and other provisions indicated in the EU Directives 2004/108/EC (electromagnetic compatibility) and 2006/95/EC (electrical safety). To request a copy of the EC declaration please feel free to 23 contact the Manufacturer Elettroplastica S.p.A - via del Commercio, 1 –25039 Travagliato (BS) Italy...
Need help?
Do you have a question about the FP050 and is the answer not in the manual?
Questions and answers