How To Replace Picture & Photograph - LG A09AW1 Owner's Manual

Single-split air conditioner heat pump with mirror finish (2.6 kw cooling, 3.6 kw heating)
Hide thumbs Also See for A09AW1:
Table of Contents

Advertisement

Maintenance and Service
How to replace picture & photograph (Art Cool Type2)
1.
Turn off power and then open
the upper part of front panel.
4.
Take out picture.
7.
Cover mat and press down
with hand(s) until contacting
closely.
In case a mat is not used, recommended size of a photo/picture:
522mm x 522mm
When powering on after replacing filter and picture,
the front panel doesn't intervene.
20 Room Air Conditioner
2.
Pull out the both links of lower
part of front panel, as
described in the below picture.
5.
Turn upside-down of the
picture and turn over mat, then
take off a protective tape
attached at the mat.
8.
Slide the photo graph/drawing
requested under both hanger
parts as following, and fix them.
Press the front panel lightly to
close.
3.
Push and close the top part of
the front panel and then pull
the bottom part of the panel
forward until it is secured.
6.
Place the picture/photograph
between the exited picture and
mat. (Recommended size of a
photo/picture: 450mm x
450mm)
Protective tape
450mm
Mat
450mm
9.
Push both links of lower part of
panel inside and fix it. Then
turn on.
522mm
522mm
Mat

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents