Related Manuals for Philips Momentum 325M7C
Summary of Contents for Philips Momentum 325M7C
- Page 1 Momentum 325M7C www.philips.com/welcome EN User manual Customer care and warranty 18 Troubleshooting & FAQs...
-
Page 2: Table Of Contents
5.1 Resolution & Preset Modes ..16 6. Power Management ....17 7. Customer care and warranty ... 18 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy ......18 7.2 Customer Care & Warranty ..21 8. Troubleshooting & FAQs ..22 8.1 Troubleshooting ...... -
Page 3: Important
DC power cord for normal operation. notes regarding the operation of your monitor. • Please use approved power cord provided by Philips at all times. If The Philips guarantee applies provided your power cord is missing, please the product is handled properly for contact your local service center. - Page 4 1. Important • If foreign substance or water gets in repaired. The damage mentioned above your monitor, please turn the power is not covered under your warranty. off immediately and disconnect Service the power cord. Then, remove the foreign substance or water, and • The casing cover should be opened send it to the maintenance center.
-
Page 5: Notational Descriptions
1. Important 1.2 Notational Descriptions 1.3 Disposal of product and packing material The following subsections describe notational conventions used in this Waste Electrical and Electronic document. Equipment-WEEE Notes, Cautions and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. - Page 6 From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take- back initiatives and recycling programs whenever possible, preferably in...
-
Page 7: Setting Up The Monitor
Top Victory Investments Ltd. or one of its a liates. Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. -
Page 8: Operating The Monitor
What is On-Screen Display (OSD)? Description of the control buttons On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. - Page 9 2. Setting up the monitor this as a reference when you want to Note work your way around the different MPRT (Moving Picture Response Time) adjustments later on. provides 0-20 levels for user to reduce motion blur. Main menu Sub menu 75Hz refresh rate or higher is required 1, 2, 3,4 LowBlue...
-
Page 10: Remove The Base Assembly For Vesa Mounting
2. Setting up the monitor Resolution notification 2.3 Remove the Base Assembly This monitor is designed for optimal for VESA Mounting performance at its native resolution, Before you start disassembling the 1920 x 1080 @ 60 Hz(VGA), 2560 x 1440 monitor base, please follow the @ 60 Hz(HDMI/DP). - Page 11 2. Setting up the monitor 3. Use a screwdriver to remove the screws on the arm,and then detach the arm/stand from the monitor. Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation.
-
Page 12: Image Optimization
FPS, in real time. Whether you're working Racing, RTS, Gamer1, Gamer2, LowBlue with text applications, displaying images Mode and Off. or watching a video, Philips SmartImage delivers great optimized monitor performance. Why do I need it? ... -
Page 13: Smartcontrast
Unique technology that dynamically time. Developed for wellbeing, analyzes displayed content and Philips LowBlue Mode setting uses a automatically optimizes a Monitor's smart software technology to reduce contrast ratio for maximum visual clarity harmful shortwave blue light. -
Page 14: Adaptive Sync
4. Adaptive Sync • AMD Radeon R7 360 4. Adaptive Sync • AMD Radeon R9 295X2 • AMD Radeon R9 290X • AMD Radeon R9 290 Adaptive Sync • AMD Radeon R9 285 • AMD Radeon R7 260X PC gaming has long been an imperfect •... -
Page 15: Technical Specifications
5. Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type Backlight W-LED Panel Size 31.5" W (80 cm) Aspect Ratio 16:9 Pixel Pitch 0.272 x 0.272 mm SmartContrast 80,000,000:1 Response Time (typ.) 22 ms(GtG) SmartResponse 4ms (GtG) MPRT 1920 x 1080 @ 60 Hz(VGA), Optimum Resolution 2560 x 1440 @ 60 Hz(HDMI/DP) Viewing Angle... - Page 16 5. Technical Specifications AC Input AC Input AC Input Heat Dissipation* Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 60Hz 230VAC , 50Hz 163.14 BTU/hr 163.48 BTU/hr 163.82 BTU/hr Normal Operation (typ.) (typ.) (typ.) <1.71 BTU/hr <1.71 BTU/hr <1.71 BTU/hr Sleep (Standby) (typ.)
- Page 17 5. Technical Specifications Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. Smart response time is the optimum value from either GtG or GtG (BW) tests.
-
Page 18: Resolution & Preset Modes
5. Technical Specifications 1440 @ 60 Hz(HDMI/DP). For best 5.1 Resolution & Preset Modes display quality, please follow this resolution recommendation. Maximum Resolution 1920 x 1080 @ 60Hz (VGA) • The highest supporting screen 2560 x 1440 @ 144 Hz (HDMI/DP) resolution on HDMI is 2560 x 1440 , but it always depends on your Recommended Resolution... -
Page 19: Power Management
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. -
Page 20: Customer Care And Warranty
7.1 Philips’ Flat Panel Monitors single black pixel. Other combinations Pixel Defect Policy of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the Types of Pixel Defects... - Page 21 Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off'. must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
- Page 22 7. Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* ≥ 15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
-
Page 23: Customer Care & Warranty
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. -
Page 24: Troubleshooting & Faqs
• Disconnect the monitor from mains This page deals with problems that can power source immediately for safety be corrected by a user. If the problem • Contact with Philips customer still persists after you have tried these service representative immediately. solutions, contact Philips customer service representative. -
Page 25: General Faqs
• Shut down your computer, appears on the screen disconnect your old monitor and • The remaining dots are normal reconnect your Philips monitor. characteristic of the liquid crystal • Turn on your monitor and then turn used in today’s technology, Please on your PC. - Page 26 Can I connect my monitor to any soft cloth. For extensive cleaning, PC, workstation or Mac? please use isopropyl alcohol. Do Ans.: Yes. All Philips monitors are fully not use other solvents such as compatible with standard PCs, ethyl alcohol, ethanol, acetone, Macs and workstations.
- Page 27 8. Troubleshooting & FAQs "Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in monitor panel technology. In most cases, the "burned in" or "atter-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off.
- Page 28 Top Victory Investments Ltd. or one of its affiliates. Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license.
Need help?
Do you have a question about the Momentum 325M7C and is the answer not in the manual?
Questions and answers