Calibrating Your Purego - Asus PureGo User Manual

Calibrating your PureGo

CAUTION!
• Ensure to follow the calibration tutorial and calibrate when using your PureGo for the
first time.
• You do not need to calibrate after every use, but we recommend calibrating your PureGo
periodically (once every 1 to 3 months, depending on usage frequency) to ensure
detection accuracy.
• We recommend recalibrating when changing usage locations to ensure detection
accuracy.
• There may be slight differences in the water quality of the same area during different
times. We recommend calibrating periodically, or calibrating when the PureGo APP
reminder appears.
To Calibrate your PureGo:
1. Press and hold the Start/Standby button for approximately 1.5 seconds until
the LED ring lights up blue, then place your PureGo into clean water.
CAUTION! To ensure the optical detection chamber is completely immersed in the water,
the belt should be below water level when your PureGo is placed into the water.
2. The LED ring will blink blue during
calibration. When the calibration process is
completed, the LED ring becomes a solid
blue light. The calibration process should
take about 25 seconds.
10 PureGo User Manual
Belt