RLH Industries Analog Signal 4~20mA Fiber Link System User Manual

USER GUIDE
Analog Signal 4~20mA Fiber Link System
Transmits a 4~20mA Analog Signal over Fiber
The Analog Signal DIN Fiber Link system transmits a 4~20mA analog
signal over one op�cal fiber. It also offers a 12 bit signal resolu�on
and less than 0.2% source signal variance.
Compa�ble with most PLC's, Sensors (2, 3, or 4 wire), and other
types of equipment where a precise current measurement must be
taken and transmi�ed over fiber. The system comprises of a
transmi�er (Analog Input) and a receiver (Analog Output), each
device has a compact DIN and wall mountable housing.
This compact and rugged system provides convenient and easy to
read LEDs, supports both single-mode and mul�mode fiber
applica�ons, and includes an alarm the receiver side for monitoring
system power and fiber health. Designed to operate over an
extreme temperature range, providing reliability in harsh
environments. Designed and Made in the USA and covered by our
Limited Life�me Warranty.
Key Features
■
Rugged design – Extreme opera�ng temperature ra�ng
■
Convenient LEDs for power, fiber, and 4~20mA signal
■ Single and dual fiber models available
■ Available with ST or SC connectors & single or mul�mode fiber
■ Transmit a 4~20mA signal over fiber
■
Update rate: 1,300 samples a second
■
12 Bit signal resolu�on
■
99.8% accuracy or be�er
■
Alarm contact for status monitoring
■
Built-in surge, over current, and polarity reversal protec�on
■ DIN rail or wall mount (Includes wall mount ears)
■ Limited Life�me Warranty
■ Made in USA
RLH Industries, Inc. 936 N. Main Street, Orange, CA 92867
RLH Industries, Inc.
Fiber Optic Link
Phone: 800-877-1672
www.fiberopticlink.com
Analog Signal 4~20mA Fiber Link System
Dimensions
FAX: 714-532-1885 email: info@fiberopticlink.com
The leader in
rugged, fiber op�c
technology
UG-M069 2021-12-13