Advertisement
Advertisement
Table of Contents
Related Manuals for Gear4music MS-25
Summary of Contents for Gear4music MS-25
- Page 1 DESK CLAMP MONITOR SPEAKER STANDS MS-25 USER MANUAL...
- Page 2 DESK CLAMP MONITOR SPEAKER STANDS...
- Page 3 INTRODUCTION Thank you for purchasing the Desk Clamp Monitor Speaker Stands by Gear4music. To get the most out of your product, please read this manual carefully. BOX CONTENTS • 2 x Rubber cap (1) • 2 x Top speaker plate (2) •...
- Page 4 CONTENTS CHECKLIST ITEM 1 ITEM 2 ITEM 3 ITEM 4 ITEM 5 TOOLS...
- Page 5 ASSEMBLY INSTRUCTIONS 1. Position the top speaker plate (2) on top of the 4. Clip the clamp (3) on to the desk then place your speaker on top, pulling the speaker cable stand (3). through the cable clip (5). 2. Use the Allen key (6) to fasten two Allen screws (4) on the top speaker plate (2).
- Page 6 SETTING UP Find the right height by pressing in the safety pin and choosing from one of the four options available. SAFETY PIN SAFETY PIN Loosen the knob situated at the top of the stand to adjust the angle of the base plate. From here you’ll be able to position it anywhere between a 10°...
- Page 7 SPECIFICATIONS Top Speaker Plate ..220mm x 180mm Tilt Angle ....±10° Clamp Width ... . . 1mm - 50mm Height Adjustment .
- Page 8 METALLVÄGEN 45A | 195 72 ROSERSBERG | STOCKHOLM | SVERIGE LAHNSTRAßE 27 | 45478 MÜLHEIM AN DER RUHR | DEUTSCHLAND If you have any more questions about this product, please do not hesitate to contact the Gear4music Customer Service Team on: +44 (0) 330 365 4444 or info@gear4music.com...
Need help?
Do you have a question about the MS-25 and is the answer not in the manual?
Questions and answers