Page 1
6803-20 Bistro Set IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed.
Page 2
Assembly Instructions 2/6 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. Keep Hex Wrench as the bolts may need to be tightened in the future.
Page 3
Assembly Instructions 3/6 STEP 3 Place Top (A) upside down on a soft cloth. Attach unit to Top (A) with Head Cap Bolts (short) and Flat Washers, tightening bolts only halfway. (See Figure 2) Tighten all bolts used in Steps 1, 2 and 3. Head Cap Bolt (short) Flat Washer Figure 2...
Page 4
Assembly Instructions / 4 6 Chair Part List Seat 1 pc. Side Side Back Cushion 1 pc. 1 pc. 1 pc. 1 pc. Chair Hardware List M6x30 M6x40 Head Cap Bolt Head Cap Bolt (long) Flat Washer 4 pcs. (+1 extra) 5 pcs.
Page 5
Assembly Instructions / 5 6 STEP 5 Attach ides (F) and (G) to Back (H) with Head Cap Bolts and Flat Washers, tightening bolts only halfway. Head Cap Bolt (See Figure 3) Flat Washer Figure 3 STEP 6 Head Cap Bolt (long) Attach Seat (E) to unit with...
Page 6
Assembly Instructions / 6 6 Flat Washer Head Cap Bolt STEP 7 Insert Head Cap Bolts and Flat Washers into unit, tightening bolts only halfway. Tighten all bolts used in Steps 5, 6 and 7. STEP 8 Turn unit to its upright position. Place Cushion (I) into position.
Page 7
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer, home styles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
Need help?
Do you have a question about the 6803-20 and is the answer not in the manual?
Questions and answers