LG M4210N-B10 User Manual page 26

Selecting and Adjusting the Screen
Selecting the options
- Tile mode (product 1 ~ 2) : r(2) x c(1)
ID 1
Reset
Use this function to reset the product to the factory default. However, language selection
and PC Control selection will not be initialized.
Set ID
Set ID
Logo light
PC Control
Logo Light
Use this function to set the Logo Display Lamp on the front side of the product to On
or Off. If you set On, the lamp will automatically be turned on.
PC Control
You can change the power setting of the PC built in the monitor.
On : Turn on/off both the monitor and the built-in PC.
Off : Turn on/off the built-in PC only.
* How to turn on or off the PC built in the monitor after setting it to Off?
(a) Press the power button at the rear side of the monitor and the SOURCE button at once.
(b) Or, press the CRT.PWR button (for the B type) or the SLEEP button (for the A type) at the
remote control.
row
ID
1
25
ID 2
column
You can assign a unique Set ID NO (name
assignment) to each product when several
products are connected for display. Specify
the number (1~99) using the
and exit. Use the assigned Set ID to
individually control each product using the
Product Control Program.
button