Advertisement
SAFETY & WARNINGS
•
The Certa Heavy Duty Caravan Cover requires two people for installation.
•
Recommended not to install on a windy day.
•
Do not install when your roof is slippery.
•
Do not tow your caravan with the cover on.
•
Spot clean the cover periodically with a soft sponge and soap. Failure to clean your
cover periodically can result in dry rot and fungal decay.
INSTALLATION
1.
Cover or tape any sharp edges on your caravan that could cut or tear down the
cover. Lower any roof antennas.
2.
Unroll the cover next to your caravan. Unzip any access panels.
3.
To cover a caravan:
•
For smaller caravans, pull the cover over the caravan using the ropes (i.e.
ropes that are tied to one side of the cover).
•
For larger caravans, climb on the caravan roof, pull the cover up and then
carefully pull the cover over the caravan.
4.
Zip all the panels closed and pull the corners of the cover over the corners of your
caravan.
5.
Adjust the straps on the back and front of your caravan cover (if applicable). The
straps should be snug but not overly tight.
Advertisement
