OPERATION
•
This device becomes very hot during use, especially. We recommend testing it on
a strand of hair to check that the setting is appropriate for your hair.
•
The curler must be kept a minimum distance of 30 - 50mm from the roots of the
hair, so as not to burn.
•
While using, avoid leaving the curler in contact with your hair for too long (2-5
seconds).
•
Please keep all openings clear of dirt and dust. if cleaning becomes necessary, be
sure to unplug the appliance before cleaning.
Step 1:
•
Plug the device into a power outlet.
•
Once the power indicator turns on, the curling wand is ready for operation.
Step 2: (optional)
•
Apply heat protectant and contouring hair products. This will help protect your hair
and add extra hold.
•
Ensure your hair is completely dry before proceeding.
Step 3:
•
Start with the lowest heat setting, separate the hair into four sections.
•
Comb and clamp each section of hair, holding for 2-5 seconds.
•
Repeat until all your hair has been curled.
Step 4:
•
Once the hair has cooled down, using either a comb or fingertips brush out the
waves until you achieve the desired hair style.
•
Set the hair in place using your preferred hair products.