Advertisement
OPERATION
Before using your hot water dispenser
It is recommended that you boil the unit a few times and discard the water before first use.
Always unplug from the plug socket and allow to cool down before cleaning. The surface of
the water tank should be wiped over with the damp cloth and dried with a soft dry cloth.
Using your hot water dispenser:
1.
Filling water tank
Remove the water tank and open the lid. Fill the water tank with the desired
amount of clean water and then close the lid. Replace the water tank.
Note:
The water level must be within the Min and Max level.
2.
Boiling the water
Ensure the plug is connected to the power outlet and the indicator light is on. Place
your cup on the water tray, ensuring it aligns with the spout. Press the switch to the
"ON" position, the LED will light up GREEN. The unit will start to boil the water for
about 5-8 seconds, the boiled water will continuously flow out from the spout.
When you have reached the desired amount of water, press the switch to the
"OFF" position. The LED will turn off and the heating elements will switch off.
Advertisement
