Sony KDF-42WE655 Quick Setup Manual

2-059-371-12(1)
KDF-42/50 WE655
KDF-55/60 WF655
KDF-55/60 XS955

Quick Setup Guide

Do not throw away this guide, and keep it handy for future reference.
For further information, see the operating instructions supplied with the TV.
Please follow the steps to setup your TV:
1 Checking the
Supplied Accessories
2 Connecting Your TV
(See reverse side)
3
Running Initial Setup
4 Programming
the Remote Control
If your product is not working properly
DO NOT RETURN TO THE STORE.
For service and technical assistance
Call our Customer Information Service Center (Toll Free):
1-800-222-SONY (7669) for US residents.
1-877-899-SONY (7669) for Canadian residents.
Sony Corporation © 2004
Printed in U.S.A.
Checking the
1
Supplied Accessories
Along with your new LCD projection TV, the packing box contains a
remote control and two AA (R6) batteries. These items are all you
need to set up and use the TV.
2
Connecting Your TV
• Review the following chart to determine which diagram to use to
connect the components in your system:
For these components See reverse side
or
or
or
or
• See the "Cables Required" chart that appears with the diagram to
determine which cables you'll need. You may need to purchase
extra accessories, such as cables and splitters, depending on the
components you plan to connect.
• Turn off and unplug all components before making connections.
• If you are connecting a digital cable box, you'll need a special bi-
directional splitter that's compatible with your cable box. Contact
your cable provider for details.
Making Video Connections
Best Video
Your TV includes
Performance
several types of video
inputs. Use the inputs
that are available on
your components that
provide the best video
performance, as
described in right.
Additional Connections
For best audio performance, connect your digital audio components
using either digital optical or digital coaxial audio connections.
Depending on which components are in your system, you may need
to complete additional connections. For example, if you have a
satellite receiver, you'll need to connect the satellite antenna. If you
have an A/V receiver, you'll need to connect speakers.
The connection diagrams shown in the reverse side are recommendations only; other
possible solutions may exist. Connections that include an A/V receiver can often be
very complex, so check your A/V receiver's instruction manual for additional details.
Activating CableCARD™ Service
Before you can use CableCARD service,
you need to insert the CableCARD
S VIDEO
(supplied by your cable provider) and
VIDEO
activate the service, as described in right.
5
Y
P
B
P R
L
AUDIO
R
Inserting the CableCARD incorrectly may result in permanent damage to the card and
the TV.
3
Running Initial Setup
1
Press POWER to turn on the TV.
The Initial Setup screen appears.
2
Press V/v to select the on-screen display language. Then press
.
The message "Start auto program now?" appears.
3
Press V/v to select "Yes", then press only.
Initial Setup automatically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.
A
If you need to perform Auto Program again
1
Press MENU.
B
2
Press V/v to select (Channel), then press
C
3
Press V/v to select "Auto Program," then press
4
Press .
D
"Auto Program" appears and the TV starts scanning and
E
presetting channels automatically. When all the receivable
channels are stored, the "Show/Hide Channels" menu appears.
Using this menu, you can start skipping unwanted channels (see
"Selecting Channel Options" in the operating instructions).
F
5
Press MENU to exit the menu screen.
Auto Program may take up to 50 minutes to complete. A progress bar will display the
approximate progress of the Auto Program and Digital Channels/Add sequences.
4

Programming the Remote Control

Connector type
HDMI
The remote control is preset to operate Sony brand video equipment.
(High-Definition
Multimedia Interface)
Sony Equipment
Component video
DVD/VCR
SAT/Cable
S VIDEO
If you have video equipment other than Sony brand that you want to
Composite video
control with the LCD projection TV's remote control, use the
RF/Coaxial
following procedures to program the remote control.
The equipment must have infrared (IR) remote capability in order to be used with this
remote control.
Using the code list below, find the three-digit code number for the
manufacturer of your equipment. (If more than one code number is
listed, use the number listed first.)
1
Press the DVD/VCR (FUNCTION) and RESET
5
buttons simultaneously, or press the SAT/CABLE
DVD/ SAT/ POWER
MUTING VCR CABLE
(FUNCTION) and RESET buttons simultaneously.
MODE
TV/
PICTURE WIDE DISPLAY VIDEO
DVD/VCR and SAT/CABLE buttons flash.
3 2
Press the function button you want to program.
To program a cable box or a satellite receiver
4
ENT
GUIDE FAVORITES MENU Press SAT/CABLE (FUNCTION).
TOP MENU
To program video equipment
Press DVD/VCR (FUNCTION).
VIDEO IN
1 3 4 VHF/UHF CABLE
SAT/
DVD/VCR CABLE TV 1, 2
3
Enter the three-digit manufacturer's code number
FUNCTION
7
F1
R L using the 0-9 buttons.
F2
AUDIO IN
FREEZE /TV/SAT ANT
L (MONO)
AUDIO 4
GUIDE Press ENT (enter).
VOL CH
R
HD/DVD IN
(1080i/720p/ 5
480p/480i) To check if the code number works, aim the TV's
6
RESET SLEEP MTS/SAP JUMP
CableCARD remote control at the equipment and press DVD/
1
AUDIO
OUT
(VAR/FIX) VCR and/or SAT/CABLE (POWER) that corre-
L
PCM/DOLBY DIGITAL TV
AUDIO
DIGITAL sponds with that equipment. If it responds, the
AUDIO OUT
R
(OPTICAL)
programming is completed. If not, try using the
IN OUT
CONTROL S
other codes listed for that manufacturer.
If more than one code number is listed, try entering them one by one until you come to
the correct code for your equipment.
If you enter a new code number, the code number you previously entered at that setting
is erased.
In some cases, you may not be able to operate your equipment with the supplied
remote control. In such cases, use the equipment's own remote control unit.
Manufacturer's codes Manufacturer
Broksonic
DVD Players
Canon
Manufacturer Code Citizen
Craig
Sony 751
Curtis Mathes
General Electric 755
Daewoo
Hitachi 758
DBX
JVC 756
Dimensia
Magnavox 757
Emerson
Mitsubishi 761
Panasonic 753
Fisher
Philips 757
Funai
Pioneer 752
General Electric
RCA/PROSCAN 755
Go Video
Samsung 758
Goldstar
Toshiba 754
Hitachi
Zenith 760
Instant Replay
JC Penney
DVD Changers
Manufacturer Code
JVC
Sony 765
Kenwood
Panasonic 766
LG
LXI (SEARS)
DVD/VCR Combo Units
.
Manufacturer Code
Magnavox
Marantz
Sony 767
.
Broksonic 776 Marta
JVC 775 Memorex
Minolta
Panasonic 777
Samsung 774 Mitsubishi/MGA
Toshiba 773 Multitech
NEC
Zenith 768
Olympic
HDD/DVD Combo Units
Optimus
Orion
Manufacturer Code
Panasonic
Sony 770, 771, 772
Pentax
Philco
5.1ch DVD AV System
Philips
Manufacturer Code
Pioneer
Sony (DAV) 601, 602, 603, 604 Quasar
RCA/PROSCAN
AV Receivers
Manufacturer Code
Realistic
Sony 764
Sansui
Samsung
VCRs
Sanyo
Manufacturer Code
Scott
Sony 301, 302, 303
Admiral (M. Ward) 327
Sharp
Aiwa* 338, 344 Signature 2000 (M.Ward) 338, 327
Audio Dynamic 314, 337
SV 2000
Replacing the Lamp
If the screen becomes dark, the color looks unusual, or the LAMP
indicator on the front of the LCD projection TV flashes, it is time
to replace the lamp with a new one (not supplied).
Programmable Code Number
Use a Sony XL-2100U or XL-2100 (for WE655 series) or XL-2200 (for WF655 series)
replacement lamp (not supplied) for replacement. Use of any other lamp may damage the
601 (Sony Dream System)
LCD projection TV.
Before replacing the lamp, turn the power off on the main unit. Wait several minutes,
801 (Sony Satellite Receiver)
then unplug the power cord. (The cooling fan will continue to blow for about two
minutes after turning the power off.)
Allow the lamp to cool down completely before removing it. The surface of the lamp
remains extremely hot for at least 30 minutes after the power has been turned off.
Sony XL-2100U or XL-2100 for KDF-WE655 series
1
Loosen the screws on the rear
side panel.
*The illustration described in right is for
KDF-50WE655.
2
Remove the front panel.
3
Loosen the screw with a coin or
similar object to remove the lamp cover.
4
Loosen the two screws that hold
the lamp, then pull out the lamp.
5
Replace the new lamp and tighten the screws.
6
Reattach the lamp cover and tighten the screw.
7
Reattach the front panel securely.
8
Tightly screw the side panel in its place.
Sony XL-2200 for KDF-WF655 series/KDF-XS955 series
1
Loosen the screws on the rear
side panel. (only for WF655)
Code Manufacturer Code
319, 317 Sylvania 308, 309, 338, 310
309, 308 Symphonic 338
332 Tashiro 332
2
302, 332 Tatung 314, 336, 337
Remove the front panel.
304, 338, 309 Teac 314, 336, 338, 337
341, 312, 309 Technics 309, 308
314, 336, 337 Toshiba 312, 311
304 Wards 327, 328, 335, 331,
332
319, 320, 316, 317,
318, 341 Yamaha 314, 330, 336, 337
330, 335 Zenith 331
WF655
338
Cable Boxes
329, 304, 309
3
Loosen the screw, release the bar (for WF655) or slide the knob
322, 339, 340
Manufacturer Code
332
Sony 230 to left (for XS955), and remove the lamp cover.
306, 304, 305, 338
Hamlin/Regal 222, 223, 224, 225,
309, 308
226
309, 305, 304, 330,
Jerrold/G.I./Motorola 201, 202, 203, 204,
314, 336, 337
205, 206, 207, 208,
218, 222
314, 336, 337, 345,
346, 347
Oak 227, 228, 229
WF655
314, 336, 332, 337
Panasonic 219, 220, 221
332
Pioneer 214, 215
4
Loosen the screw that secure the lamp, then pull out the lamp.
332, 305, 330, 335,
Scientific Atlanta 209, 210, 211
338
Tocom 216, 217
308, 309, 310
Zenith 212, 213
314, 336, 337
332
Satellite Receivers
309, 335
Manufacturer Code WF655
305, 304
Sony 801
323, 324, 325, 326
5
Replace the new lamp and tighten the screw.
Dish Network 810
325, 338, 321
314, 336, 337 Echostar 810
General Electric 802
309, 308
6
Reattach the lamp cover and tighten the screw.
Hitachi 805
327
317 Hughes 804
Mitsubishi 809
308, 309, 306, 307
7
Reattach the front panel securely.
Panasonic 803
305, 304
308, 309 RCA/PROSCAN 802, 808
Toshiba 806, 807
308, 309, 310
8
Tightly screw the side panel in its place. (only for WF655)
308
* If an Aiwa VCR does not
308, 309, 306
work even though you enter
304, 305, 308, 309,
311, 312, 313, 310,
the code for Aiwa, enter the
329
code for Sony instead.
309, 330, 328, 335,
324, 338
314
322, 313, 321
330, 335
312, 313, 321, 335,
323, 324, 325, 326
327, 328
338
XS955
XS955
XS955