Advertisement
Quick Links
Advertisement
Related Manuals for Navilock u-blox NL-8012U
Summary of Contents for Navilock u-blox NL-8012U
- Page 1 NL-8012U u-blox 8 multi GNSS USB receiver 4.50 m Operation manual (62524)
- Page 2 Thanks to its compact design and its high sensitive chipset, it is the ideal companion at work and at leisure. 1.1. Contents* 1x Navilock NL-8012U 1x 8cm CD ROM including operation manual * Before using the device, please make sure that all the parts are included in the package. If any parts are missing or damaged, please contact your dealer immediately.
- Page 3 “ u-center 8.xx Installer.exe ” from the CD-ROM, or download the driver from the Navilock website. Follow the installation instructions. After the installation is completed, restart your computer. Then the GNSS COM port will be available in the device manager under connections.
- Page 4 After starting the u-center software, check the functionality of your NL-8012U. 1. Selecting the COM port 2. Selecting the baud rate 3. Downloading Assist GNSS and updating the receiver 4. Visual display of the NMEA data 5. Configuration manager 6. NMEA/UBX message console 7.
- Page 5 You can select your GNSS system or your combination of several systems on the right side. The following combinations are possible: RTCM GNSS SBAS Galileo GLONASS BeiDou QZSS EGNOS WAAS MSAS GAGAN SDCM SNAS (RUS)* (EU)* (USA) (RUS) (CHN) (EU) (USA) (IND) (CHN)
- Page 6 6. EGNOS configuration with u-center 8.xx NL-8012U use EGNOS as default. In the configuration menu you can check these options. For detailed information please use the documentation from u-blox http://www.u- blox.com/images/downloads/Product_Docs/u-Center_User_Guide_(UBX-13005250).pdf. 7. AssistNow configuration with u-center 8.xx The NL-8012U supports AssistNow. AssistNow is a standard A-GNSS service, which increases the performance of the GNSS receiver, by calculating a position almost immediately, even under difficult reception conditions.
- Page 7 Please use the following token in the configuration menu: Further information to the u-center can be found in the u-blox documentation under http://www.u-blox.com/products/u_center.html. If you have any questions, please contact u- blox directly. Danger of explosion at contact with fire! Do not permanently expose the receiver to temperatures of over 60°...
- Page 8 The Navilock repair center tries to be as obliging as possible, so please tell us the real reason for the defect. During the error analysis, we can generally detect if the cause for the defect was an external cause, water damage, fall, over-voltage or the wrong handling of the unit.
- Page 9 9. Specifications Chip set manufacturer/type u-blox 8 multi GNSS Channels: 72 channels Sensitivity -167 dBm Frequency: GPS: L1, 1575.4200 MHz BEIDOU COMPASS: B1, 1561.0980 MHz GALILEO: E1, 1575.4200 MHz GLONASS: G1, 1602.5625 ~ 1615.5000 MHz Target precisions: Position horizontal: GPS/SBAS/QZSS+GLONASS and TCXO 2.0 m CEP Time: 1 microsecond synchronized with GPS time Speed:...
- Page 10 Navilock. The brand Navilock is a registered trademark and may not be used without the written authorization of the trademark owner. In no case may it be altered or completed by additions.
-
Page 11: Conformity Declaration
Conformity declaration Please download the Declaration of Conformity from http://www.navilock.de/support/ in the conformity area. WEEE note The WEEE (Waste Electrical and Electronic Equipment) directive, which came into force on 13 February 2003, lead to a comprehensive change in the disposal of used electric products. It is the main purpose of this directive to avoid electric waste products (WEEE), while simultaneously promoting the re-usage, recycling and other forms of reconditioning in order to reduce the amount of waste.