ASROCK H61M-S1 PLUS User Manual page 26

ATX Power Connector
(24-pin ATXPWR1)
(see p.13 No. 4)
Though this motherboard provides 24-pin ATX power connector,
it can still work if you adopt a traditional 20-pin ATX power supply.
To use the 20-pin ATX power supply, please plug your
power supply along with Pin 1 and Pin 13.
ATX 12V Power Connector
(4-pin ATX12V1)
(see p.13 No. 1)
Chassis Intrusion Header
(2-pin CI1)
(see p.13, No. 15)
SPDIF Out Connector
(2-pin SPDIF_OUT1)
(see p.13, No. 19)
Please connect an ATX power
12 24
supply to this connector.
1 13
20-Pin ATX Power Supply Installation
Please connect an ATX 12V
power supply to this connector.
This motherboard supports
CASE OPEN detection feature
1
GND
that detects if the chassis cover
Signal
has been removed. This feature
requires a chassis with chassis
intrusion detection design.
Please connect the
SPDIF_OUT connector of a
HDMI VGA card to this header
with a cable.
26
12 24
1 13