Advertisement
Place the monitor in a convenient, well-ventilated location near your computer.
Connect the signal cable. When attached, tighten the thumbscrews to secure the
connection.
Connect the power cord into a proper power outlet that is easily accessible and close to
the display.
Press
button on the side switch panel to turn the power on.
When monitor power is turned on, the
Function'
is executed automatically.
2
For Apple Macintosh use, a separate plug adapter is needed to change
the 15 pin high density (3 row) D-sub VGA connector on the supplied
cable to a 15 pin 2 row connector.
'Self Image Setting
A7
1
Advertisement
