Lian-Li UNI FAN SL RGB Installation Manual

Lian-Li UNI FAN SL RGB Installation Manual

Revolutionized daisy-chain argb fan
Hide thumbs Also See for UNI FAN SL RGB:

Advertisement

UNI FAN SL
RGB
Revolutionized Daisy-Chain ARGB Fan
INSTALLATION GUIDE

FAN CABLE INSTALLATION

風扇線材安裝
1
2
Fixed
Release
- 1 -
FAN CONNECTION FAN
風扇連接風扇
1
2
Fixed
Note!
When using the UNI FAN SL in a custom water cooling configuration, make
sure that the fittings on the radiators do not interfere with the contact point on the side
of the fans. We suggest to use the insulating tape to isolate contact points.
注意!
定義
冷配置中
UNI FAN SL
風扇側面的接觸點,
Release
確保散
器上的配
絕緣膠帶隔
接觸點。
- 2 -
不會干擾

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UNI FAN SL RGB and is the answer not in the manual?

Questions and answers

Summary of Contents for Lian-Li UNI FAN SL RGB

  • Page 1 FAN CONNECTION FAN 風扇連接風扇 UNI FAN SL Revolutionized Daisy-Chain ARGB Fan INSTALLATION GUIDE 安 南 Release Fixed Note! When using the UNI FAN SL in a custom water cooling configuration, make FAN CABLE INSTALLATION sure that the fittings on the radiators do not interfere with the contact point on the side 風扇線材安裝...
  • Page 2 CONTROLLER CABLE CONNECTION MOTHERBOARD SYNC 控制器線材連接 主機板 SYNC MOTHERBOARD 5V ADDRESS LED HEADER Connect to 警告: GROUP 1, or 請不要連接錯誤類型的 GROUP 2, or LED接頭,如果連接到12V接口 GROUP 3, or ADDRESS LED header ,將造成永久損壞。 GROUP 4. Warning: Do not connect the Data wrong type of LED connector. No Pin Ground If it is connected to the 12 V...

Table of Contents