Table of Contents Important Instructions Package Includes Specifications Getting to Know Your Smart Heater Installing Your Heater Installation Steps Using Your Smart Heater Pairing Your Smart Heater with the Govee Home App Care & Maintenance Troubleshooting...
IMPORTANT INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: Read all instructions before using this heater. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater.
Package Includes Item Quantity Heater User Manual Quick Start Guide Front Base Rear Base Specifications Power Input 120V~60Hz 1500W MAX High: 1500W Medium: 1000W Wattage Low: 700W Connectivity Wi-Fi or Bluetooth Oscillating Angle 80 Degrees Cord Length 5.9ft / 1.8m...
Installing Your Heater Before You Install ① Use a Φ 5mm Phillips screwdriver to remove the ② Align the holes of the 2 base halves and connect 3 black screws at the bottom of the heater unit. them together. ③ Thread the power cord through the base. ④...
Note: Do not cover the heater with any cloth or covering, especially over the air inlet and outlet. Using Your Smart Heater You can access additional features using the Govee Home app. Panel 1.Button Functions Power Button to cycle through heat settingsⅠ,Ⅱand Ⅲ. Long press Press to power on.
Page 8
Oscillation/Lock Button Press to turn on oscillation. Press again to pause oscillation. Long press for 3 seconds to turn on Lock Mode. When the lock is active, buttons on the panel will not respond to presses. Long press again for 3 seconds to turn o the Lock Mode. Note: will ash when any other button is pressed to indicate the Lock is on.
Due to ongoing updates and improvements, Govee Home App may be slightly di erent than shown in the manual. In case of any di erences, follow the in-app instructions. To download Govee Home app, scan the QR code or search “Govee Home” in the Apple App Store (iOS devices) or Google Play Store (Android devices).
Tap the device icon and follow the on-screen instructions to complete pairing. Note: Choose to “Allow” all permissions when using Govee Home app for the rst time. This app will not record your personal device use. You can use the Govee Home app to connect your smart heater to Amazon Alexa or Google Assistant.
Troubleshooting Note: The troubleshooting section below is for solving frequently asked questions for the heater unit. If your problem persists, please contact customer support. For Smart Heater Problem Possible Cause Solution Securely reinsert the plug into the The plug of The power plug and the socket.
Page 12
The heater may be connected with another smartphone. Disconnect it from the other smartphone rst. 3. The heater is o ine. Make sure the heater is plugged in and powered on, then refresh “My Devices” in the Govee Home app by swiping down on the screen.
Page 13
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 14
fixed/mobile exposure condition. The min separation distance is 20cm. FCC ID:2AQA6-H7130 The following importer is the responsible party Name: GOVEE MOMENTS(US) TRADING LIMITED Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448 Email: support@govee.com Contact information: https://www.govee.com/support This device complies with Industry Canada licence-exempt RSS standard(s).
Page 15
Customer Service Warranty: 12-Month Limited Warranty Support: Lifetime Technical Support Email: support@govee.com O cial Website: www.govee.com @Govee @govee_o cial @govee.o cial @Goveeo cial @Govee.smarthome...
Page 16
For FAQs and more information, www.govee.com please visit:...
Need help?
Do you have a question about the H7130 and is the answer not in the manual?
Questions and answers