Advertisement
Table of Contents
PH01 Overview
switch for
P = Phono Output
H =Headphone Output
plug in your turntable here
volume control
plug in your audio system here
connect your groundwire
from your turntable
power indicator
1/4" headphone output
power switch
plug in power supply
page 1 of 2
Advertisement
Table of Contents
Summary of Contents for TTL PH01
- Page 1 PH01 Overview volume control power indicator switch for P = Phono Output H =Headphone Output 1/4” headphone output plug in your audio system here power switch plug in your turntable here plug in power supply connect your groundwire from your turntable...
- Page 2 - Make sure your ground wire is properly connected. - Un-plug + re-plug all cables. - Raise volume on your audio system while lowering volume on PH01. - Check your power source by plugging directly into a wall rather than a power strip or try a different outlet.
Need help?
Do you have a question about the PH01 and is the answer not in the manual?
Questions and answers