Table of Contents
Advertisement
Contrast
The Contrast option displays a slider bar to enable the adjustment of the screen contrast. Contrast
adjustments are more discernible when the background is white.
Image control
The Image control option contains the following sub-menu:
•
Display Resolution Mode
a. Fill
b. Aspect
c. 1:1
d. Current Mode
e. Recommended Mode
f.
Exit Sub-menu
•
Horizontal position
•
Vertical position
•
Clock
•
Phase
•
Exit sub-menu
Horizontal position
The H position option displays a slider bar to enable the adjustment of the screen horizontal position.
The center of the bar is obtained from the factory-preset value for Horizontal Position. At value=MIN, the
selection of + positioning response might vary between XGA and FHD panels. This is caused by physical
limitations at MIN OSD placement.
Vertical position
The V position option displays a slider bar to enable the adjustment of the screen's vertical position.
The center of the bar is obtained from the factory-preset value for Vertical Position.
Clock
The Clock option displays a slider bar to enable the adjustment of the Horizontal Clocks.
Phase
The Phase option displays a slider bar to enable the adjustment of the analog signals phase.
DisplayPort will automatically be displayed on UPG KVM Console
Advertisement
Table of Contents
