Page 11
Limiter Indicators- The output indicators shows the status of the limiter and output level. The <SIG> indicator shows signal presence and will illuminate when a signal is present in the output. The second indicator <-6dB> shows that the signal has reached 6dB below the limiter threshold. The third <LIMIT> indicator signals that the threshold of that output channel has been reached.
Page 12
Networked Audio Ports- The DSC48 has the option for networked audio ports; if none are required a blanking plate will be fitted. There are several options for networked audio including Dante™ and AVB™. For a full list please consult your vendor.
Page 13
Device Name Preset Number Preset Name DSP Input letter Outputs assigned...
Page 26
** This latency figure is calculated using the crossover High-pass frequency (in kHz) This latency figure is calculated using the Vx Split frequency (in kHz)