Canon imageRUNNER C2550 Network Manual page 52

12
3
13
3-10
Protocol Settings
If you want to respond to multicast discovery requests, set <Use Multicast
Discovery> to 'On'.
IMPORTANT
IPv6 is not supported.
On the TCP/IP Settings screen, press [Use PASV Mode for
FTP] ➞ specify the following.
IMPORTANT
Whether you use the PASV mode for FTP depends on the network environment
you are using and the settings of the file server you are sending to. Before
specifying the PASV mode for FTP, consult your network administrator.
On the TCP/IP Settings screen, press [IPP Print Settings] ➞
specify the following.
[On]: You can use IPP as the print application. Pressing [On] for [IPP Print
Settings] automatically sets [Use HTTP] to 'On'.
To use SSL to encrypt the IPP data, press [On] for <Use SSL>.
If you are using IPP authentication, press [On] for <Use Authentication> ➞ enter
the user name to use for IPP authentication in [User], and the password to use for
IPP authentication in [Password].