Canon imageRUNNER C2550 Network Manual page 88

■ Changing the Port after Installing the Driver
1
3
2
3-46
Setting Up a Computer for Printing/Sending a Fax
Install Canon LPR2, and change the port settings.
If you are using Windows Vista or you do not want to use Canon LPR2, proceed
to step 2.
For instructions on how to install Canon LPR2 and set ports, see the
User's Guide
(PDF manual). For instructions on how to display the
User's Guide Network Quick Start Guide
, see the
IMPORTANT
If you use LPD, enter one of the following in [LPR Queue Name] in the [Add Port]
dialog box of Canon LPR2:
- LP
The machine prints according to its spool settings. Normally enter <LP> as a print
queue.
- SPOOL
The machine prints only after spooling a print job on the hard disk, regardless of
its spool settings.
- DIRECT
The machine prints without spooling a print job on the hard disk, regardless of its
spool settings.
In the printer properties dialog box of the printer you installed,
select the [Ports] sheet ➞ click [Add Port].
Canon LPR2
Canon LPR2
.