Advertisement
Quick Links
Advertisement
Summary of Contents for Simpnic SiMP Strip
- Page 1 SiMP Strip Quick Installation Guide SLS-01-SW...
- Page 2 1. Package Content 2. Get Started 2.1 Preparation 2.2 Installation 2.2.1 Length 2.2.2 Connection 2.2.3 Power On 2.2.4 Placement 2.2.5 Concatenation 2.3 Pairing 2.4 Reset 3. FAQ 4. Support...
-
Page 3: Package Content
1. Package Content SiMP Strip (3 meters) Controller (white) Adapter (white) Quick Installation Guide Warranty Card SiMP Strip can only work with SiMPNiC SiMP Keeper. Please make sure you already have SiMP Keeper. Otherwise SiMP Strip can’t work. -
Page 4: Get Started
2.1 Preparation Get your SiMP Keeper ready and download SiMPNiC App in advance. To make SiMP Strip work, you need to set up SiMP Keeper first. Please refer to SiMP Home Kit Quick Installation Guide or tutorial in SiMPNiC App. - Page 5 2.2 Installation 2.2.1 Length First, confirm the length you need to install. SiMP Strip is in unit of 0.1 meters. You can tell it by parallel copper mark. For example, if you need 3.53 meters long, you have to cut it at 3.6 meters.
- Page 6 2.2.2 Connection Second, connect the strip plug (with pins) with controller (with holes). There are arrow signs on both device. Make sure they are aligned. 2.2.3 Power On Third, connect the controller with adapter and plug adapter into the socket. When it illuminates, the work is done! You can use controller to adjust the illumination you prefer.
- Page 7 2.2.4 Placement Make sure the strip is installed flat. If not, the illumination would be irregular. Please pay attention to the corner. Please don’t use SiMP Strip in environment of extreme heat or humidity, like kitchen or bathroom. 2.2.5 Concatenation In few special cases, you might need to concatenate two strips together.
- Page 8 2.3 Paring Pairing SiMP Strip with your SiMP Keeper in SiMPNiC App. If your SiMP Strip is from Home Kit, it’s already in your SiMPNiC App. You can tap the "Room" icon at the navigation bar and then you will see it.
- Page 9 ⑥ SiMP Keeper will beep 2 times and begin searching. The process lasts about 45 sec (remember to check SiMP Strip is blinking during this period). And then SiMP Strip will appear in the list. ⑦ If SiMP Strip is not found, select "Cancel" and search again.
- Page 10 2.4 Reset When power is on, press the side button of SiMP Strip for 5 seconds. The blue LED indicator will start blinking, (for about 4 minutes). During this period of time, you can pair it. Attention: Once you reset, SiMP Strip will return to factory default settings.
- Page 11 5 seconds and then it starts blinking. Q: Why SiMP Strip can’t be found in the list? A: First, make sure SiMP Strip is blinking before pairing. If it still can not be found, try to search again.
- Page 12 4. Support For more product information, FAQ, and tutorials, please visit SiMPNiC website: Youtube Facebook page...
- Page 13 For More support, please contact us via support@simpnic.com...
- Page 14 Ver. 201910...
Need help?
Do you have a question about the SiMP Strip and is the answer not in the manual?
Questions and answers