Advertisement

USER MANUAL
MODEL-YCD50P
Fridge/Freezer
Read user manual before operating your fridge/freezer.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the YCD50P and is the answer not in the manual?

Questions and answers

Summary of Contents for Rockpals YCD50P

  • Page 1 USER MANUAL MODEL-YCD50P Fridge/Freezer Read user manual before operating your fridge/freezer.
  • Page 2: Safety Information

    SAFETY INFORMATION: WARNING ● This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. ●...
  • Page 3: Parts List

    PARTS LIST: 1、Lid handle 7、Telescoping Handle 2、Control Panel 8、LED light 3、Carry Handle 9、USB 4、Air flow vent 10、Power input panel 5、Sturdy Durable Wheels 11、Removable insulating lid 6、Accessory holders 12、12/24V DC Power Cable (not shown)
  • Page 4: Specifications

    SPECIFICATIONS: MODEL YCD50P Dimensions LxWxH Net Weight 14.5Kg Storage Volume 47 L Voltage DC 12/24V Rated Current 5.5A/3.3A Refrigerant Gas R134a-CFC Free -20°C to +20°C Temperature Range (-4°F to 68°F) 5V/2A 628mm 409mm...
  • Page 5: Installation

    INSTALLATION: ● Place the refrigerator on a dry, sheltered, flat surface and away from any edges. The refrigerator must not beused unsheltered, in the open air or exposed to splashing or rain. ● Your refrigerator requires good ventilation, especially around the back of the refrigerator, allow a gap of at least 15 cm around the sides, back and top.
  • Page 6: Power Management

    POWER MANAGEMENT The Fridge/Freezer is designed to operate on DC voltage inputs. DC input 12V or 24V 2.5m,16AWG DC cable For optimum performance and efficiency, it is important that the appliance has a reliable 15A fuse protected DC supply in good condition. Direct connection to the battery is recommended and reduces the risk of voltage dropping to the appliance.
  • Page 7: Battery Protection

    Cooling Mode Control: Power on, short press the " " button to switch the "Max" and "eco" modes (the default mode max). Battery Protection: ● In standby mode, press and hold the key " " and " " for 3 seconds to display the current corresponding battery protection status and flash.

Table of Contents