Advertisement
LVDS-Adapter
Assembly
Step
Detail
Step
1. Insert the screw from the bottom
side and mount the 3mm spacer as
shown.
2. Move back the screw, the spacer
will retain.
3. Insert the bottom adapter into the
DIMM socket.
4. Lock the adapter correctly and
push the screws completely through
the hole.
5. Mount the 4mm spacer on top.
6. Put the 2
nd
adapter part on top,
but don't fix the screws!
7. Step by step pull out a screw on
the bottom side and insert it from
the top side.
The nuts must be mounted on the
bottom side!
Ka-Ro electronics GmbH - Pascalstr. 22, D-52076 Aachen, Germany - Tel.: +49 2408 1402-0 (FAX -10)
www.karo-electronics.de
Advertisement
