Page 1
Micro Projector ELEMENT SERIES Quick Start Guide...
Page 2
Your Miroir Micro Projector System Indicator Light – Indicator light will illuminate blue when the projector is starting up. Audio Out (3.5mm) – Connect an external speaker or headphones. USB Power Output – Connect a USB power cable to provide power to a HDMI streaming stick or to charge a smartphone battery.
Page 3
Connect Your Apple Products Rubber Foot Pads - Prevent bottom casing damaged To connect your Apple device to your projector, you will need an Apple Digital AV Adapter (sold separately) and an HDMI cable Tripod Mount - Will fit a standard sized tripod screw. Tripod (included in the box).
Page 4
Connect Your Android Device Connect Your HDMI Connected Devices: Laptops, Streaming Android devices support a variety of connectivity standards. Here are a few examples of how you would connect: Devices, Streaming Sticks Source Device Cable/Adapter Required Android Devices that USB-C to HDMI Adapter (sold separately) To connect your HDMI support USB-C Video out and HDMI Cable (included in the box)
Troubleshooting • Check that the power indicator light is illuminating to red when the projector is plugged into power. If the light is not The image is blurry • Adjust the projected image’s focus by rolling the focus wheel forwards or backwards. No signal message •...
Need help?
Do you have a question about the ELEMENT S100 and is the answer not in the manual?
Questions and answers