Advertisement
BTE B/O Hearing Amplifier
Check the following components :
Hearing Amplifier x 1
Ear Buds x 2 ( L and S size x 1pc)
(S size is already attached to the hearing amplifier)
Zinc Air battery P13 x 1
Portable Case x 1
Product Illustration :
Ear Bud:
Soft silicon ear bud
Two interchangeable sizes are
provided.
Insert and Replacing the Batteries :
1. Open the battery compartment gently and insert the battery. Only use the standard recommended
the Zinc Air battery P13. (Remove the old one if this is not the first time using.)
2. Place the new battery in the compartment with positive (+) terminal facing outwards.
3. Close the battery compartment. The hearing amplifier will automatically be powered on.
Note:
● To avoid damaging the battery compartment, DO NOT forcibly remove the battery or open / close
the compartment.
● If adjusting the volume to its highest setting, the sound is barely heard or there is no sound at all.
This indicates that the battery needs to be replaced.
Speaker
Portable case
Microphone
Volume Adjustment Dial:
Turn the dial to adjust the
volume.
Battery Compartment
Lock
Unlock
Advertisement
Table of Contents
Summary of Contents for Mimitakara BTE B/O
- Page 1 BTE B/O Hearing Amplifier Portable case Check the following components : Hearing Amplifier x 1 Ear Buds x 2 ( L and S size x 1pc) (S size is already attached to the hearing amplifier) Zinc Air battery P13 x 1...
- Page 2 To Turn Power On & Off? Open the battery Insert a battery and Battery compartment until completely close the contacts the battery is no battery compartment. longer touching the battery contacts. How to Use the Hearing Amplifier? 1. The hearing amplifier comes with 2 different ear bud sizes (large & small). Please select the size that best fits your ear.
Need help?
Do you have a question about the BTE B/O and is the answer not in the manual?
Questions and answers