Advertisement
Quick Links
387202 SOCCER GOAL
INST387202
www.upper90goals.com
(800) 523-5177
ASSEMBLY, MAINTENANCE, & USAGE MANUAL
PORTABLE No. 387202
- 6'-6" x 18'-6" SOCCER GOAL PAIR
w/ anchors, and nets
TOOLS REQUIRED
9/16" WRENCH & RATCHET W/ SOCKET
7/16" WRENCH & RATCHET W/ SOCKET
6/5/2014
INST387202
Copyright 2014 by Litania Sports Group Inc.
All rights reserved.
Page 1 of 10
Advertisement
Related Manuals for UPPER90 387202
Summary of Contents for UPPER90 387202
- Page 1 387202 SOCCER GOAL INST387202 www.upper90goals.com (800) 523-5177 ASSEMBLY, MAINTENANCE, & USAGE MANUAL PORTABLE No. 387202 - 6'-6" x 18'-6" SOCCER GOAL PAIR w/ anchors, and nets TOOLS REQUIRED 9/16" WRENCH & RATCHET W/ SOCKET 7/16" WRENCH & RATCHET W/ SOCKET...
- Page 2 387202 SOCCER GOAL INST387202 www.upper90goals.com (800) 523-5177 STEP 1: Unpack all boxes and check against parts list below. Each 387202 (pair of goals) should include the following: CLAMP - QTY 4 (CLMP00089) INSERT - QTY 24 (FRME38799) BRACE - QTY 4 214"...
- Page 3 387202 SOCCER GOAL INST387202 www.upper90goals.com (800) 523-5177 STEP 2: Unpack the FITG pack and check against parts list below. Each 387202 (pair of goals) should include the following hardware: 3/8"-16 x 3-1/2" BOLT - QTY 8 LONG (HDWE 01035 0E0) 3/8"-16 x 3-1/4"...
- Page 4 387202 SOCCER GOAL INST387202 www.upper90goals.com (800) 523-5177 STEP 3: Assemble crossbar, uprights, and corner pieces as shown. Brace Insert 3/8" Nut 3/8" Washer 3/8" Bolt Short Insert Corner Upright 3/8" Bolt Short 3/8" Bolt Long * NOTE: The LONG 3/8" bolt will be...
- Page 5 387202 SOCCER GOAL INST387202 www.upper90goals.com (800) 523-5177 STEP 4: Assemble the other crossbar and uprights as shown. NOTE: The direction of the decals should face down. This section will get flipped up. DECAL DECAL DECAL Upright Crossbar Insert Insert 3/8" Nut...
- Page 6 387202 SOCCER GOAL INST387202 www.upper90goals.com (800) 523-5177 STEP 5: Lift the front frame assembled in Step 4 onto the base frame assembled in Step 3. 6/5/2014 INST387202 Copyright 2014 by Litania Sports Group Inc. All rights reserved. Page 6 of 10...
- Page 7 387202 SOCCER GOAL INST387202 www.upper90goals.com (800) 523-5177 STEP 6: Secure the two frames as shown. Be sure that the goal is at a 90° angle. DECAL DECAL DECAL 90° CONFIRM BEFORE TIGHTENING HDWE 3/8" Washer 3/8" Bolt Long 3/8" Nut...
- Page 8 387202 SOCCER GOAL INST387202 www.upper90goals.com (800) 523-5177 STEP 7: Attach the Anchors to the Clamps as shown. Ground Anchors will clip onto the 1/4" bolts. 1/4" Bolt NOTE: Goal MUST be anchored in the ground at all times 1/4" Washer 1/4"...
- Page 9 387202 SOCCER GOAL INST387202 www.upper90goals.com (800) 523-5177 STEP 7: Attach the net with the provided Bungee cords. Appropriately space cords to prvent any net sag. STEP 8: Check and tighten all hardware connections. Assembly of the soccer goal is now complete.
- Page 10 387202 SOCCER GOAL INST387202 www.upper90goals.com (800) 523-5177 WARNING READ ALL WARNINGS THOROUGHLY BEFORE USING THIS EQUIPMENT. FAILURE TO COMPLY WITH THE FOLLOWING INSTRUCTIONS AND WARNINGS MAY RESULT IN SERIOUS INJURIES AND/OR PROPERTY DAMAGE. Always anchor goals, at the rear of the goal, per the manufacturer's instructions. Unsecured goals can fall over causing serious injury or death.