Replacing Positioning Pins - Bosch rexroth PE 2/X Assembly Instructions Manual

Positioning pins
Positioning pin wear
Malfunctions and possible damage to the positioning unit

Replace the positioning pins every 2 million cycles.

10.4 Replacing positioning pins

Required tools
• Open-end wrench, SW13.
• Allen keys, sizes 3, 4, 5, 6.
• Phillips screwdriver, PZ2
• Caliper, 500 mm
• Rubber mallet
• Strainer
• Hand-lever press
Maintenance and repair
NOTICE
3 842 564 350/2020-06, MIT: PE 2/X, PE 2/H, PE 4, Bosch Rexroth AG
31/40