Advertisement
Quick Links
Advertisement
Summary of Contents for GAMA Electronics PB3-DRC
- Page 1 Rev. B 11/26/18...
- Page 2 Jumper Location External Power Mode Self Powered Mode Inside the case there is a jumper connection located to the left of the STOP switch. The jumper connects the center pin of a 3-position header to one of the outside header pins. See the images to the right for proper jumper orientation.
- Page 3 Rev. B 11/26/18...
- Page 4 2. Press and hold the program switch until the front panel LED illuminates, and the release the program switch. 1. Press and hold the program switch until the front panel LED illuminates. 2. Release the program switch and immediately press and hold the program switch a second time. The LED will start blinking and then blink very rapidly.
- Page 5 Rev. B 11/26/18...