Advertisement
Quick Links
Rev. 6/16/2020
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description of
it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department
can also be contacted online at http://www.vestilmfg.com/parts_info.htm.
Electronic copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
manuals.php
.
Signal
Words.........................................................................................................................
Safety
Instructions..................................................................................................................
Exploded View and Bill of
Installation............................................................................................................................
Record of Satisfactory
Inspections and
Maintenance...................................................................................................
Labeling
Diagram............... ............................................................................................................
Limited
Warranty.....................................................................................................................
Copyright 2020 Vestil Manufacturing Corp.
BOL-G-24-3.5
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Web:
Table of Contents
Materials..............................................................................................
Condition................................................................................................
Vestil Manufacturing Corp.
Fax: (260) 665-1339
www.vestilmfg.com
BOL-G MANUAL
e-mail:
info@vestil.com
https://www.vestil.com/page-
Page 1 of 5
2
2
3
3
4
4
4
5
Advertisement
Summary of Contents for Vestil BOL-G-24-3.5
- Page 1 Additional copies of this instruction manual may be downloaded from https://www.vestil.com/page- manuals.php Table of Contents Signal Words……………………………………………….………………………………………………………… Safety Instructions……………………………………………………………..………………………….………… Exploded View and Bill of Materials………..……………………………………………………………....Installation……………………………………………………………………………………………………………. Record of Satisfactory Condition…………………………………………………………………………………... Inspections and Maintenance……………………………………………………………………………………… Labeling Diagram.………….. ………………………………………..……………..........Limited Warranty…………………………………………….………………………………………………...…….. Copyright 2020 Vestil Manufacturing Corp. Page 1 of 5...
-
Page 2: Signal Words
DO NOT attempt to resolve any problem(s) with the product unless you are both authorized to do so and • certain that it will be safe to use afterwards. DO NOT modify the product in any way UNLESS you first obtain written approval from Vestil. • Unauthorized modifications automatically void the... -
Page 3: Exploded View And Bill Of Materials
Your building engineer should determine the necessary length of the anchor bolts. Copyright 2020 Vestil Manufacturing Corp. Page 3 of 5... -
Page 4: Inspections And Maintenance
Alternatively, you may request replacement parts and/or service by calling (260) 665-7586 and asking the operator to connect you to the Parts Department. Copyright 2020 Vestil Manufacturing Corp. Page 4 of 5... - Page 5 Before providing warranty service, Vestil will require you to send the entire product, or just the defective part (or parts), to its facility in Angola, IN. What is covered under the warranty? The warranty covers defects in the following original, dynamic parts: motors, hydraulic pumps, motor controllers, and cylinders.