Initial System Setting; Initial Setting - LG SP820 Owner's Manual

16

Initial Setting

Initial Setting
Initial Setting
When you turn on the unit for the first time, the
initial setup guide appears on the screen. Set the
display language and network settings by following
the initial setup guide.
1. Press 1 (POWER).
The initial setup guide appears on the screen.
To start the set-up steps, select the [OK], and
press Wheel (
2. Select a display language and press Wheel (
3
3. Try the some features of your Magic Remote
Control by following the guide on the screen.
4. Select your country to see its content services.
).
5. Read and prepare the preparations for the
network settings and then select [ Start
Connection] to start connection.
If wired network is connected, the network
connection setting will automatically be finished.
6. All available networks are displayed on the
screen. Select Wired Network or desired SSID of
).
wireless network and press Wheel (
If you have security on your access point, you
need to input the security code as necessary.
7. Check all the settings that you have set in the
previous steps.
When the initial setup setting is completed,
select [Complete] and then, press Wheel (
If there is any settings to be changed, use BACK
(1) button.
8. After reading Important Notice relating to
network service, select [Agree] button on the
Term & Conditions to go to the home menu.
).
).