Download Print this page
Pentair CADDY CTS04 Instruction Sheet

Pentair CADDY CTS04 Instruction Sheet

Telescoping pipe stand

Advertisement

Quick Links

INSTRUCTION SHEET
CTS04, CTS10
Telescoping Pipe Stand
1-4" Pipe
WARNING:
1.
Pentair products shall be installed and used only as indicated in Pentair product instruction sheets and training materials. Instruction sheets are available at
www.erico.pentair.com and from your Pentair customer service representative.
2.
PENTAIR products must never be used for a purpose other than the purpose for which they were designed or in a manner that exceeds specified load ratings.
3.
All instructions must be completely followed to ensure proper and safe installation and performance.
4.
Improper installation, misuse, misapplication or other failure to completely follow Pentair's instructions and warnings may cause product malfunction, property
damage, serious bodily injury and/or death, and void your warranty.
5.
Products that are manufactured using spring steel components shall be used only in a non-corrosive indoor environment.
6.
All pipe supports, hangers, intermediate components and structural attachments must ONLY be used as described herein and are NEVER to be used for any
other purpose.
NOTE: All load ratings are for static conditions and do not account for dynamic loading such as wind, water or seismic loads, unless otherwise noted.
The customer is responsible for:
a. Conformance to all governing codes.
b. The integrity of structures to which the products are attached, including their capability of safely accepting the loads imposed, as evaluated by a qualified
engineer.
c. Using appropriate industry standard hardware as noted above.
SAFETY INSTRUCTIONS:
All governing codes and regulations and those required by the job site must be observed.
Always use appropriate safety equipment such as eye protection, hard hat, and gloves as appropriate to the application.
Pentair, CADDY, ERICO CADWELD, ERICO CRITEC, ERICO, ERIFLEX, and LENTON are owned by Pentair or its global affiliates. All other trademarks
are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.
TECHNICAL SUPPORT:
www.erico.pentair.com
Part Number
Article Number
CTS04
580065
CTS10
580066
*Factor of Safety: 3.5:1
CFS565_B
1 OF 2
Pipe Sizes in (mm)
*Static Load Ratings lbs (N)
1-4 (25-100)
5-10 (125-250)
5-10" Pipe
© 2017 Pentair All Rights Reserved
1,370 (6,094)
1,740 (7,740)

Advertisement

loading

Summary of Contents for Pentair CADDY CTS04

  • Page 1 Pentair customer service representative. PENTAIR products must never be used for a purpose other than the purpose for which they were designed or in a manner that exceeds specified load ratings. All instructions must be completely followed to ensure proper and safe installation and performance.
  • Page 2 Pentair, CADDY, ERICO CADWELD, ERICO CRITEC, ERICO, ERIFLEX, and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

This manual is also suitable for:

Caddy cts10