Advertisement
Quick Links
01865 767676
sales@unicol.com
www.unicol.com
ODH
Screen Size: 30-86"
Guide Max. Weight: variable
Revised 15/12/20
*Please check model specific details before installing*
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for
pinch points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any
spring loaded parts. Before installing, make sure that the supporting surface will support five times the
combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also
layout all components to ensure that you have all of the required parts before proceeding (see BOM list
on following page). Use of this product for anything other than its specified use may result in failure or
personal injury. This product is intended for indoor use only. We recommend using a qualified trades
person for installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Advertisement
Related Manuals for Unicol ODH
Summary of Contents for Unicol ODH
- Page 1 This product is intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant or lifting equipment to lift and position products. For support, please call: +44 (0)1865 767676 or email: sales@unicol.com...
- Page 2 01865 767676 sales@unicol.com www.unicol.com TOOLS REQUIRED INSTALLERS REQUIRED Pozi Head Screwdriver Security Allen Key COMPONENTS Please Note: Power Cable Not Supplied DESCRIPTION Front Cover and Polycarbonate Screen ODH Main Body inc. Components Mount Back Plate Mounting Arms Revised 15/12/20...
- Page 3 01865 767676 sales@unicol.com www.unicol.com STEP 1 STEP 2 Remove both front cover retaining screws using the Lift off front cover by unhooking at top. security allen key. Separate Main Body from Screen rail by unbolting transport bolts from screen rail and main body...
- Page 4 01865 767676 sales@unicol.com www.unicol.com STEP 6 STEP 5 Using another team member, lift the screen up and Utilise the cable entry hole through grommet gradually offer it up to the back plate. Double hook located on the bottom of the casing to connect the arms over the lips of the back plate and lower.