General Settings - LG RHT497H User Manual

g) Press OK [ ]. Program is set as favorite and FAV is displayed.
While watching TV, press [FAV] and select a favorite channel to view.
ADDING A CHANNEL
To add a channel manually to a program list:
a) Display set up menu (see Displaying Set Up Menu)
b) Auto Programming is highlighted. Select Program Edit from
middle panel
c) Select Add Channel from right panel and press OK [ ]
d) Use [ ] to select Digital or Analogue
e) Press [ ] and select program number
f) Press OK [ ] to confi rm
LG RHT49X instructions.indd Sec1:19 LG RHT49X instructions.indd Sec1:19

GENERAL SETTINGS

DISPLAYING SET UP MENU
a) Press HOME [ ]. First menu is displayed.
b) Press [ ] until Easy Menu is displayed
c) Select SETUP
d) Press OK [ ] to display set up menu
SETTING UP REMOTE TO CONTROL YOUR TV
To operate your TV with Unit remote control:
If your TV is listed in table below:
a) Press and hold TV POWER [
c) Enter TV manufacturer code as follows:
Manufacturer Code number
LG / GoldStar [1] (Default) [2]
Zenith
Samsung
Sony
Hitachi
d) Release TV POWER [ ] button
e) Switch TV back on if necessary
After replacing batteries in remote control repeat steps (a) to (c).
TV ASPECT
To select aspects ratio of connected TV:
a) Display set up menu (see Displaying Set Up Menu)
b) Auto Programming is highlighted. Select TV Aspect from
middle panel
c) Select option in right panel:
• 4:3 Letter Box for a standard 4:3 screen TV with wide
picture and bands on upper and lower areas of screen.
• 4:3 Pan Scan for a standard 4:3 screen TV with wide
picture on entire screen, cutting off parts that do not fi t.
19
]
[1 3 4]
[6 7]
[8 9]
[4]
2009-03-04 2009-03-04 3:50:16 3:50:16