EPS Move Desk 3500 User Manual

Navigation
keys
F2 menu
F3 menu
Chip card
reading
PAYMENT WITH CHIP CARD
Payment confirmation with PIN
1. Enter the payment sum in cents and press
green button.
2. When card
„Present card. Sum XX EUR",
to insert the payment card.
3. After customer inserts the payment card, the
„Authorization. Amount XX EUR
message
sum. Enter PIN"
screen.
4. When customer enters PIN code and press
green button, the message
Remove card"
5. If customer enters wrong PIN code it can be
edited by using
button is used in order to cancel payment.
Payment confirmation with signature
Enter the payment sum in cents and press
1.
green button.
When card
2.
„Present card. Sum XX EUR",
to insert the payment card.
3. After customer inserts the payment card,
"Approved"
message
card reader prints receipt.
4. Ask customer to sign on receipt and check if
the signature is the same as the one on the
payment card.
5. If signature matches, confirm payment with
button. If signature doesn't match,
green
cancel the payment with
Contactless
card reading
Magnetic
Cancel
Confirm
reader displays message
ask customer
appears on card reader's
„Approved.
is displayed.
yellow button. The
reader displays message
ask customer
appears on screen and
red button.
PAYMENT WITH MAGSTRIPE CARD
1. Enter the payment sum in cents and press
green
2. When card reader displays message
„Present
customer to swipe the card.
3. After customer swipes the payment card,
stipe
message
sum. Enter PIN"
4. After customer confirms PIN code, on card
reader screen might appear request to
Edit
enter
payment card number.
5. Enter last four digits and press
button. The message
on the screen.
In some cases payment with magnetic stripe card
might be confirmed with signature (see instructions
for payment confirmation with signature).
PAYMENT WITH CONTACTLESS CARD
1. Enter the payment sum in cents and press
green
2. When
„Present card. Sum XX EUR", ask
customer to tap the payment card.
3. After a few seconds audible signal (beep)
is heard and four green LED lights
indicators switch on card reader.
The message "Approved. Card is read.
4.
Remove card" appears on the card
reader's screen.
red
If the amount of purchase doesn't exceed the sum of
contactless
confirmation with PIN code usually is not needed.
In some cases, due to the implemented security
requirements, additional payer authentication is
required in one of the following ways:
1) When the customer taps the card, the
message "Insert card" is displayed on the
screen. Ask the customer to insert the card
and enter the PIN code.
2) When the customer taps the card, an
audible signal is heard and the message
"Enter PIN code" is displayed on the screen.
Ask the customer to enter a PIN.
3) When the customer taps the card, an
audible signal is heard and the message
"Remove the card. Repeat." is displayed.
Ask the customer to tap the card again.
button.
card. Sum XX EUR",
„Authorization. Amount XX EUR
appears on screen.
last four digits of
„Approved"
button.
card reader displays
payment limit set
ask
customer's
green
appears
message
by banks