Summary of Contents for Vanco EVOLUTION EVSP24VW
- Page 1 Expandable 2x4 HDMI® Video Wall Processor Vanco Part Number: EVSP24VW Expandable 4K 2x4 HDMI® Video Wall Processor www.vanco1.com • 800.626.6445...
- Page 2 DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters.
-
Page 3: Package Contents
INTRODUCTION The Evolution by Vanco EVSP24VW 4K Video Wall processor allows a source signal to be displayed across multiple displays to create a video wall. Equipped with two HDMI 2.0 inputs to connect multiple sources, with four outputs to create a video wall out of the box in multiple configurations. -
Page 4: Specifications
SPECIFICATIONS HDMI Compliance ............HDMI 2.0 HDCP Compliance ............. HDCP 2.2/1.4 RS-232……………………………......Baud rate: 57600, data bit: 8, Stop bit: 1, no parity Input Video Formats ........... 4096x2160p 24/25/30/50/60Hz 3840x2160p 24/25/30/50/60Hz 1080p 24/25/30/50/60Hz 1080i 50/60Hz 1920x1200 60Hz 1680x1050 60Hz 1600x1200 60Hz 1440x900 60Hz 1400x1050 60Hz... -
Page 5: Panel Descriptions
PANEL DESCRIPTIONS 1. Power LED: Illuminates when the unit is powered on 2. Input LED: Illuminates when sources are connected and sending signal 3. Loop-out LED: Illuminates when connected to HDMI displays or additional EVSP24VW units 4. Output LED: Illuminates when HDMI displays are connected and powered on 1. -
Page 6: Connection Diagram
CONNECTION DIAGRAM Control/Network Amplifier Set-Top Box Computer Video Wall CONNECT AND OPERATE 1. Connect your sources such as a PC, Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. to either of the HDMI inputs on the unit 2. - Page 7 CONTROLLING THE EVSP24VW Controlling the EVSP24VW is easy out of the box, with TCP/IP and RS232 control. RS-232 Control Connection Supports RS-232 control with a baud rate of 57600. Connect the RS232-CTL port of the EVSP24VW to a PC via a serial cable, as shown in the following figure: Network Control Connection Connect the LAN port of the EVSP24VW to a PC or network, as shown in the following figure: Product Software...
- Page 8 Switch Page – Used to switch between both HDMI inputs Select UART (with RS232 cable) or Network (with Cat5e/6 cable) to connect device (baud rate is 57600 bps) • If using UART/RS232 for control, select the COM PORT that is being used to connect and communicate to your computer, then click on DISCONNECT to CONNECT for communication •...
- Page 9 Signal Setting – Set the input and output resolutions, and scale each output Click on “Read” to read the resolution of each input port Select the type of signal for each output from the dropdown list Select the resolution that best matches the display from the dropdown list, or choose a resolution to scale to Click on “Read”...
- Page 10 Picture Quality (PQ) and Position – Adjust the picture settings for each output Select the output to “fine tune” Click “Read” to show the current output settings Click “Reset” to return the output to factory default Adjust and fine tune the video settings such as Brightness, Contrast, Saturation, and Sharpness www.vanco1.com...
- Page 11 Video Wall - Setting up the Video Wall Configuration Use the Video Wall Setting controls to change how the displays are arranged on the Video Wall page. a. Adjust the Rows and Columns sliders to change the displayed screen arrangement to adjust the video wall configuration on the right hand side;...
- Page 12 Video Wall Context Menu Right clicking on any of the screen icons will display the following context menu: Screen Stitching This option connects the selected screens into a video wall configuration Cancel Stitching Return the Video Wall configuration to normal outputs Screen x - Cancel Stitching 3840x2160p 30Hz Input Select...
- Page 13 Bezel Setting The Bezel Setting section allows the entry of values to compensate for the display bezel thickness. These values may be entered either as pixels (Type A) or as mm (Type B). Type A Bezel Settings The image size will be adjusted to allow for the number of pixels entered in each of the entry boxes. Click the “Set”...
-
Page 14: Troubleshooting
If you are still encountering issues, attempt the “hot-plug concept. With all of the HDMI cables disconnected, turn on the source and plug in the HDMI cable into it’s output, then power up the Vanco unit and plug the HDMI cable into it’s input, finally turn on the display and plug the HDMI cable from the receiver into it. -
Page 15: Limited Warranty
If repairs are needed during the warranty period the purchaser will be required to provide a sales receipt/sales invoice or other acceptable proof of purchase to the seller of this equipment. The seller will then contact Vanco regarding warranty repair or replacement. - Page 16 ® Vanco International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.vanco1.com...
Need help?
Do you have a question about the EVOLUTION EVSP24VW and is the answer not in the manual?
Questions and answers