Phoenix S10001 Quick Start Manual

Download this manual

General Information

Please inspect the product immediately upon receipt for transit damage, missing packs/parts or

manufacturing fault. Damage reported later cannot be accepted. Please handle the product with

care avoiding knocks and shock loading to all sides and edges of the glass.

We recommend that this product is installed on a solid wall surface to reduce the risk of excess

movement on the wall channel.

Notes: Safety glass can not be re-worked.

Please read these instructions carefully before start of installation.

Special care should be taken when drilling walls to avoid hidden pipes or electrical cables.

Note: This product is heavy and may require two people to install.

Aftercare instructions

After use, your shower should be cleaned with soap and water. This is particularly important

in hard water districts where insoluble lime salts may be deposited and allowed to build up.

Cleaners of a gritty or abrasive nature should not be used. Care should be taken to avoid contact

with strong chemicals such as organic solvents and strippers.

Over time, silicone sealants will perish - we recommend that this is replaced as and when

required.

Please keep these instructions for aftercare and customer service details.

Need help?

Do you have a question about the S10001 and is the answer not in the manual?

Page 1 General Information Please inspect the product immediately upon receipt for transit damage, missing packs/parts or manufacturing fault. Damage reported later cannot be accepted. Please handle the product with care avoiding knocks and shock loading to all sides and edges of the glass. We recommend that this product is installed on a solid wall surface to reduce the risk of excess movement on the wall channel. Notes: Safety glass can not be re-worked. Please read these instructions carefully before start of installation. Special care should be taken when drilling walls to avoid hidden pipes or electrical cables. Note: This product is heavy and may require two people to install. Aftercare instructions After use, your shower should be cleaned with soap and water. This is particularly important ...
Page 2 BATH SCREENS It is important to remember that water will find it’s way naturally. This is a physical law that we cannot change. Our frameless bath screens are designed as a deflector for water to try and reduce the chance of water escaping from the showering area over a bath during normal showering conditions.
Page 8 Silicone on the outside of the unit as and where required.