Polywood TT11 Quick Start Manual

MODEL: TT11
__(1) HARDWARE PACK
ADIRONDACK CHAIRS NOT INCLUDED

TOOLS NEEDED

4MM HEX KEY ALLEN, T-HANDLE
(INCLUDED). 7/16 WRENCH (NOT INCLUDED)
QTY DESCRIPTION
A - 1/4-20 X 2-1/2 WAFER SHCS
2

ASSEMBLY INSTRUCTIONS

STEP 1

- Remove (2) 3/4" screws from shipping bar and recycle bar by taking it to nearest recycling
center and placing in plastic milk jug bin.

STEP 2

- Remove (2) 2-1/4" Bolts from front of chair arms and replace with (2) 2-1/2" (A).
Use existing Washer and Nylock Nut.
-Remove 3" Hex Head Lags from back of chair arms and re-insert to fasten table in place.
ALL HARDWARE IS STAINLESS STEEL
Shipping Bar
REMOVE AND RE-INSERT
3/4" screw
4/13/2015