Subscribe to Our Youtube Channel
Summary of Contents for Winterwarm SmartBox ECO Heater
- Page 1 Handleiding GA3911 Smart Box ECO Heater v02.doc Version: 0.2 2014-02-26 SmartBox ECO Heater GA3911 Version: 0.2 26 February 2014...
- Page 2 Handleiding GA3911 Smart Box ECO Heater v02.doc Version: 0.2 2014-02-26 Table of contents. Table of contents........................2 SmartBox overview......................3 Buttons........................3 Display icons......................3 Status screen........................4 Startup ........................4 No communication ....................4 Demand generation.
- Page 3 Handleiding GA3911 Smart Box ECO Heater v02.doc Version: 0.2 2014-02-26 1 SmartBox overview. 1.1 Buttons. Smart Box Eco Heater GA3911 E - history Reset Menu A - history Button Function Heat/Fan Plus (+) Auto/Off Min (-) Reset/Menu Table 1 - Button functions Figure 1 - 166RT SmartBox The SmartBox uses 5 buttons that can control the system.
- Page 4 Handleiding GA3911 Smart Box ECO Heater v02.doc Version: 0.2 2014-02-26 2 Status screen. The SmartBox is able to display the status of the system. The status is shown with a status ID and 2 status codes. Status ID Code left Code right Status Off.
- Page 5 Handleiding GA3911 Smart Box ECO Heater v02.doc Version: 0.2 2014-02-26 3 Demand generation. With the SmartBox it is possible to generate demand for heating or ventilation. These functions are controlled with button S1 Heat/Fan. 3.1 Manual heat demand. To generate a manual heat demand the “Heat/Fan” button needs to be pressed until the display shows the text “brn”.
- Page 6 Handleiding GA3911 Smart Box ECO Heater v02.doc Version: 0.2 2014-02-26 4 Extra information. The SmartBox is able to show additional information about the system. These menus can be accessed by using a combination of buttons. 4.1 Flamerod menu. The flamerod value can be displayed on the SmartBox. To enter the flamerod menu the buttons “Plus (+)”...
- Page 7 Handleiding GA3911 Smart Box ECO Heater v02.doc Version: 0.2 2014-02-26 4.2.3 Error codes When the display is in error an error code is displayed. The error code consists of 2 characters on the display. The left character shows the state of the control in which the error was stored. The right character shows on of the following error codes.
- Page 8 Handleiding GA3911 Smart Box ECO Heater v02.doc Version: 0.2 2014-02-26 4.3 Settings menu. To access the settings menu the system first has to be set to OFF. To do this the button “Auto/Off” has to be pressed for 5 seconds until the display shows “OFF”. The system is OFF when the display shows the status “-0”.
Need help?
Do you have a question about the SmartBox ECO Heater and is the answer not in the manual?
Questions and answers