PRODUCT DIMENSIONS
RHAC01
275.4
FRONT VIEW
RHAC02
211.1
FRONT VIEW
ALL DIMENSIONS IN MM UNLESS OTHERWISE STATED.
Fitment
RHAC01
Fits Leaf Eater Original and Leaf Eater Plus
RHAC02
Fits Leaf Beater
DISCLAIMER This product specification is not a complete guide to product usage. Product specifications may change without notice. For more
information visit rainharvesting.com.au. Keep this manual handy for future reference. © Rain Harvesting Pty Ltd.
COMPLIANCE
•
AS/NZS 3500.3:2003 Plumbing and Drainage –
Stormwater Drainage
•
enHealth Council
– Guidance on the Use of Rainwater Tanks
– Preventing Mosquitoes Breeding
+61 (0)7 3248 9600
181.3
SIDE VIEW
179.9
SIDE VIEW
•
HB230:2008 Rainwater Tank Design and
Installation Handbook
•
Queensland Health Regulations 1996
(Part 8 – Mosquito Prevention)
rainharvesting.com.au
Clean Shield™ Screen
Installation and Specification Guide
PRODUCT DETAILS
Upgrade your Leaf Eater Original, Leaf Eater Plus,
or Leaf Beater rain heads with a leaf-shedding,
mosquito-proof, easy-clean replacement screen.
RHAC01 Leaf Eater Original/Plus Clean Shield™ Screen
RHAC02 Leaf Beater Clean Shield™ Screen
FEATURES AND BENEFITS
•
Easy Install, low maintenance
replacement screen
•
Patented single screen technology
for advanced debris shedding (Clean
Shield™ technology)
•
Enhances catchment efficiency by
deflecting debris out of the flow of
water
•
Increases flow rate performance
•
Mosquito-proof 955 micron Stainless
Steel Screen
Need help?
Do you have a question about the RAIN HARVESTING Clean Shield RHAC01 and is the answer not in the manual?
Questions and answers