Komshine KOC-125 Instructions

KOC-125 Optical Fiber Cleaning Pen Instructions
1
External function description
C. Lock Button
D. Outer Shell
F. Indicato r
Slide
Standard Mode
N . o P a t r N a m e
A
T p i L e a
B
Nozzle Lead tip to the optical connecter end face.
C
Lock Button
Push the button to extend and contract the nozzle.
D Outer Shell
Push the outer shell to clean the connector.
E Guide Cap
Acts as dust cap or cleaning adapter for connector plug.
F Indicator
Provides indication of remaining cleaning cloth.
3
Connector inside adaptor
1. Remove Guide Cap from the device
Guide Cap
2. Insert tip of cleaner into MU/LC Adaptor
Standard Mode
Note: This drawing shows only LC, but this product can clean MU too.
3. Push the Outer Shell to start cleaning the
MU/LC connector end face. A "click" sound
indicates end of cleaning process. Close the
cover after use.
Be careful not to slant the Cleaner MU/LC while inserting into
the adapter.
Do not overly exert force during insertion as this may
cause damage to both the connector and the Cleaner MU/LC.
If pushing Outer Shell is inhibited, remove Cleaner MU/LC
from adapter and
ensure that there is no sizeable debris inhibiting the
cleaning process.
Push Lock Button
B. Nozzle
Pull Nozzle
E. Guide Cap
Pull Nozzle while
pushing button.
A. Tip
Extended Mode
F u n t c o i n
d h t e c e l a n n i g c o l h t o t h t e o p c i t a c l o
MU or LC Adaptor
Extended Mode
CLICK !!
Full
多
Little
少
Empty
無
n n e t c r e e n d a f c . e
2
Identification of remaining cloth
View of Indicator
Cloth
(White)
Cloth
(White)
Red
Red
4
Connector plugs alone
1. Open the Cover on the Guide Cap
Guide Cap
Cover
2. Insert MU/LC connector into the Guide Cap
MU or LC Plug
3. Push the Outer Shell to start cleaning the
MU/LC connector end face. A "click" sound
indicates end of cleaning process. Close the
cover after use.
CLICK !!
Push straight.
Be careful not to slant MU/LC connector while
inserting into the Guide cap.
Do not overly exert force during insertion as this may
cause damage to both the connector and the Cleaner MU/LC.
If pushing Outer Shell is inhibited, remove Cleaner MU/LC from
adapter and ensure that there is no sizeable debris inhibiting the
cleaning process.
View of the Nozzle end
Tip (Black)
Cloth (White)
Tip (Black)
No Cloth
(Black)