VTech Toot-Toot Drivers Train Station User Manual page 10

ACTIVITIES - TRAIN
1. Slide the ON/OFF SWITCH to the ON position
to turn the unit ON. You will hear train sounds,
a song and a phrase. The light will flash with
the sounds.
2. Press down the MOTOR CONTROL BUTTON
to start the motor. The train will move forward
automatically and you will hear train sounds.
The light will flash with the sounds.
3. Press the LIGHT-UP BUTTON to hear train
sounds, songs and phrases. Press and hold
the LIGHT-UP BUTTON to stop the motor. The
motor will restart after the button is released.
The light will flash with the sounds.
4. When the motor is off, push the train over the 10 SmartPoints
included in the play set to hear greetings, fun sounds, short tunes and
sing-along songs. The light will flash with the sounds. The train also
interacts with SmartPoints
play sets (each play set sold separately). Push the Train when there
is no response to hear a random melody, push it 4 times to jam train
sounds in to the melody. The light will flash with the sounds.
5. When the motor control button is pressed down, let the train run
through the SmartPoints of different themes on the tracks to hear
greetings, fun sounds, short tunes, and sing-along songs.
6. When the motor is off, if there is no input after approximately 8
seconds, you will hear an invitation and a sound effect. After another
8 seconds of no input, a song will play. If there is no input for a further
8 seconds, the unit will play a short tune and then go into sleep
mode. When the motor is running, you'll hear all of the above, then
the train will enter sleep mode after 5 minutes of no input. The train
can be re-activated by pressing the light-up button, pressing down
the motor control button or pushing the train quickly.
on other VTech
TM
Toot-Toot Drivers
®
TM
®
9