Advertisement
If mounting to a surface which cannot be
drilled e.g. glass, apply the double sided
adhesive supplied as picture below. Press
firmly to ensure a strong bond.
For cabling to the left, right or above route
cables through the channel on the back of
the display. Secure using 3 x tape strips
provided
If cabling is to be routed through lower
cable exit or back to cavity wall, thread
cables through the mount before fitting.
If mounting with screws, use a screw driver
to secure the mount to the wall. Ensure
screw heads are flush with the mount plate.
Only use the provided M4x33mm
countersunk screws provided with the
Reserva Edge. If mounting to glass first
ensure glass is clean of any contamination,
peel the backing from the tape and firmly
press the mount to the surface. It is critical
that the mount is level and clearance is left
for mounting the display.
ONELAN Ltd, Bryants Farm
Kiln Road , Reading. RG4 9PB
www.onelan.com
~
www.reservaroomsigns.com
United Kingdom
support@onelan.com
Advertisement
