Table of Contents
Advertisement
CD RECORDING
1. To erase only the last track, press the
ERASE button. Note that the Information
Display will display 01 TRK and the
ERASE Indicator will flash.
2. Press the SELECT button within three
seconds and note that the ERASE
Indicator will stop flashing.
3. When the ERASE Indicator goes out the
Information Display will show the total
number of tracks that now remain on the
disc.
You may erase more than one track,
counting backwards from the last track.
1. Press the ERASE button. Note that the
Information Display will display 01 TRK
and the ERASE Indicator will flash.
2. Press the NEXT[
] button or PREV.
] button until the number of tracks to
[
be erased appears in the Information
Display.
For example, when 06 TRK appears in
the display a total of six tracks will be
erased, counting back from the last track
on the disc.
3. Press the SELECT button within three
seconds of making the track selection
and note that the ERASE Indicator will
stop flashing. When the ERASE Indicator
goes out the Information Display will
show the total number of tracks that now
remain on the disc.
Important Note: Tracks at the beginning or
in the middle of the disc may not be erased
until all of the discs after them have been
erased.
Important Note on Erasure and
Finalization Times: Regardless of the
speed at which a disc was recorded, the unit
will erase and finalize discs at the 4x speed
to minimize the length of the process.
However, in some cases it may be
necessary for the unit to repeat the erasure
or finalization due to the nature of an
individual disc. For that reason, it is normal
for the time required to complete these
steps to vary from one disc to another.
- 25 -
Advertisement
Table of Contents
