Advertisement
Installation
1
Removing the doors and drawers
□ Before installing the flute, remove the doors
and drawers from the vanity base.
□ Open each drawer as far as possible.
□ Push the bracket lever underneath the drawer
box (refer to step-1 image) and disconnect
the drawer box from the slide.
□ For each door press to open the hinges to
remove the doors (refer to step-2 image).
2
Securing the flute to the vanity
□ Align the flute (A) to the side of the vanity base.
□ Rotate the flute (A) upside down for left/right configurations.
□ Using a drill, insert 1-1/4 in. screws (AA) into the pre-drilled holes in the inside of vanity base (as shown in illustrations).
A
Step-2
AA
5
Please contact 1-800-998-7021 for further assistance.
NOTE: Illustrations show left and right
positioning. Each flute is sold individually.
HOMEDEPOT.COM/HOMEDECORATORS
Step-1
AA
Advertisement
