Page 1
700 lb. 44700 1000 lb. 44100 Model 44700 Model 44100 This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
PRODUCT DESCRIPTION Omega Engine Transverse Bar is designed to safely support engine up to 700 lb. It assists the removal of transaxle easily by supporting engine of front wheel drive vehicle. Heavy duty steel frame helps prevent distortion and twisting.
Page 3
(#7) all the way down towards the hook portion to hold it out of the way until needed. Then, locate the best position on the support arm for the second hook and install in the same manner. 6. Now the Engine Transverse Bar is ready to use. Figure 2 - Model 44700 Assembly & Parts Illustration...
Page 4
ASSEMBLY INSTRUCTION FOR MODEL 44100 (refer to Figure 3) 1. Slide the bigger leg (#13) into boom (#1) and smaller leg (#14) to boom extension (#2). Secure the legs by tighten the knob screws (#16). The rubber blocks (#17) is attached to the bottom of legs. 2.
(#3) directly into 44700-M0 Manual engine lift brackets for extra protection. 44700-L0 Label for 44700 Note: Use only fasteners rated Grade 5 or higher as 44100-L0 Label for 44100 engine support bolts. 6. Tighten the barrel hex. nuts (#7) on both hooks (*) Hardware Kit includes item# 3, 4, 5, 7, 8 &...
ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy.