1. Manuals
  2. Brands
  3. Hydro Tek Manuals
  4. Washer
  5. Hot-2-Go Series
  6. Operation and maintenance manual

Hydro Tek Hot2Go CPS Series Operation And Maintenance Manual

Hide thumbs Also See for Hot2Go CPS Series:
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATION and MAINTENANCE
CPS Series
HV
Series
SH
Series
SK
Series
HOT LINK Series
Hot2Go® is mfg. in the USA by Hydro Tek Systems. Inc.
IMPORTANT: TO REDUCE RISK OR INJURY, READ OPERATING
INSTRUCTIONS CAREFULLY BEFORE USING
$15.00
MANUAL
Certified to
ISO 9001:2008
© Hydro Tek 08/2014
© Hydro Tek 05/2014

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Hot2Go CPS Series and is the answer not in the manual?

Questions and answers

Related Manuals for Hydro Tek Hot2Go CPS Series

Summary of Contents for Hydro Tek Hot2Go CPS Series

  • Page 1 Series Series HOT LINK Series Certified to ISO 9001:2008 IMPORTANT: TO REDUCE RISK OR INJURY, READ OPERATING INSTRUCTIONS CAREFULLY BEFORE USING Hot2Go® is mfg. in the USA by Hydro Tek Systems. Inc. © Hydro Tek 08/2014 © Hydro Tek 05/2014...

  • Page 2: Table Of Contents

    PARTS LIST / EXPLODED VIEW .................. Enclosed WIRING DIAGRAMS ...................... Enclosed INSTALLATION INSTRUCTIONS .................. Enclosed Manufactured by Hydro Tek Systems, Inc – Redlands, CA USA USE ONLY CERTIFIED ORIGINAL EQUIPMENT REPLACEMENT PARTS, FAILURE TO DO SO COULD LEAD TO WARRANTY EXCLUSION AND SEVERE BODILY INJURY...

  • Page 3: Introduction

    Please locate the enclosed warranty diesel engines and some electric motors are registration card and return it to Hydro Tek to register warranted by the manufacturer of the component and their warranty is provided through the manufacturer’s your machine. If problems occur, contact the dealer you bought your service centers.
  • Page 4 8. Disconnect power supply before making any 5. If you are unable to resolve the warranty claim, repairs or adjustments. write to Hot2Go c/o Hydro Tek Systems, Inc. 2353 9. Transformer on burner is 20,000 volts. Disconnect Almond Ave. Redlands, CA 92374 USA, Attn.: battery cable before servicing burner or engine on Technical Services.

  • Page 5: Safety Warnings

    SAFETY WARNINGS SPRAY INJECTION PRECAUTION: 4. AVOID contact with the exterior of the coil/heat exchanger assembly, mufflers, and exhaust port or 1. Fluid from high-pressure spray or leaks can stack to prevent burns. penetrate the skin and cause serious injury. If any 5.

  • Page 6: Operating Instructions

    OPERATING INSTRUCTIONS BEFORE START UP: Read all instructions gun firmly, squeeze trigger for high-pressure spray. CAUTION – Gun kicks back – hold with both hands. 1. CHECK PUMP OIL: Check pump oil by locating WARNING – risk of explosion – DO NOT spray the oil view window.
  • Page 7 OPERATING INSTRUCTIONS WASHING TECHNIQUES SHUT DOWN When washing, always start from the bottom up, and Warning: Cool down burner before shutting off. do the final rinse from the top down. This will keep the water from streaking the surfaces that are being cleaned.

  • Page 8: System Information

    SYSTEM INFORMATION POWER SYSTEMS: proper type capacity. engine ELECTRIC MOTORS: All single manufacturer recommends a break-in period at which phase electric motors contain a time the engine oil and filter should be replaced. manual automatic thermal Thereafter, change oil and filter as required by engine overload, which will shut down the manufacturer.

  • Page 9: Unloader And Pressure Relief Valve

    SYSTEM INFORMATION UNLOADER AND PRESSURE RELIEF VALVE: The draw from a tank if you ensure that the vacuum does unloader valve is preset by manufacturer to not exceed negative 3psi. An 80 mesh, 200 micron strainer and a ¾” I.D. or larger suction hose must be govern the proper output pressure of your machine.

  • Page 10: Diesel Fired Burner

    SYSTEM INFORMATION These pictures show different reasons for coil pipe the water flowing through it. Use clean failure: #2 DIESEL FUEL for the burner or substitute #1 diesel, light fuel oil, or Kerosene if diesel is not available. AIR BAND adjustments may need to be made to compensate for higher elevations, or if more than a trace of smoke is observed in the burner exhaust.

  • Page 11: Pressure Delivery System

    SYSTEM INFORMATION PRESSURE DELIVERY SYSTEM: NOZZLES: The spray nozzle DISCHARGE HOSE: Use only a wire braid hose precisely machined rated for the output pressure and temperature of the orifice made of hardened machine. Additional hose lengths can be added with stainless steel.

  • Page 12: Accessories

    ACCESSORIES OPTIONAL ACCESSORIES: or reduce temperature setting before using. Simply HEATING COIL PROTECTION: remove regular spray nozzle, replace with the turbo Protect your heating coil by removing debris or nozzle and squeeze the trigger on the spray gun. Do minerals from inlet water by adding a filter or anti- not point the turbo nozzle upward when starting.
  • Page 13 ACCESSORIES HYDRO TWISTER – Surface Cleaners: HYDRO VACUUM® WASTEWATER RECOVERY The Hydro Twister® is a flat Hydro Tek manufactures Hydro surface cleaner that connects Vacuum®, a product line of to a pressure washer and uses mobile wastewater recovery a spray bar rotating at a high accessories.

  • Page 14: Trailers

    TRAILER INFORMATION TRAILERS: Hot2Go trailers are designed to match TRAILER MAINTENANCE SCHEDULE your Hot2Go washer and increase productivity. 12 MTH. 3 MTH. 6 MTH. Several trailer and tank skid configurations are ITEM FUNCTION REQUIRED OR 3000 OR 6,000 available. 12,000 MILES MILES MILES...

  • Page 15: Troubleshooting Guide

    TROUBLESHOOTING GUIDE PROBABLE CAUSE REMEDY PROBLEM (The most recurring probable cause is listed first) (Repairs should only be made by a qualified technician) Power System: Gasoline or Diesel Engine Powered Engine will not start or crank Battery dead. Charge or replace battery, add electrolyte if battery is new. over Dirty battery connection.
  • Page 16 TROUBLESHOOTING GUIDE PROBABLE CAUSE REMEDY PROBLEM (The most recurring probable cause is listed first) (Repairs should only be made by a qualified technician) Pumping System Trigger gun leaks or will not shut off Debris in gun valve assembly. Clean valve assembly or replace gun. Pump runs but has low spray pressure Water turned off.
  • Page 17 TROUBLESHOOTING GUIDE BURNER TROUBLE SHOOTING SH and SK SERIES 12V DC BURNER DOES NOT COME ON BURNER DOES NOT TURN OFF ▼▼▼▼ ▼ IS THE SWITCH ENGAGED TO !! CAUTION!! TURN UNIT OFF ►NO ► TURN BURNER SWITCH TO "ON" POSITION "ON"...

  • Page 18: Maintenance Log

    MAINTENANCE LOG MODEL# ____________________________________ SERIAL# ____________________________________ Date of Service Number of Run Hours Service Performed Month/Day/Year Since Last Service...

  • Page 19: Service/Maintenance Schedule

    MAINTENANCE SCHEDULE While your pressure washer has been produced with Contact your Hot2Go dealer for maintenance. A small quality materials and craftsmanship, you as the owner investment in preventative maintenance will add many have certain responsibilities for the correct care of the hours to the life of your pressure washer.
  • Page 20 Nozzle Nozzle Size Size Orifice Orifice Size Size Nozzle Nozzle Size Size...

This manual is also suitable for:

Hot2go hv seriesHot2go sh seriesHot2go sk seriesHot2go hot link series

Table of Contents