Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Elecro Engineering Thermecro Solar
Summary of Contents for Elecro Engineering Thermecro Solar
- Page 1 Thermecro Solar Digital Controller Installation & Operating Manual...
- Page 2 www.elecro.co.uk...
-
Page 3: Important Notes
Important Notes Congratulations on purchasing the Thermecro pool & spa heating system, the latest in advanced solar technology, manufactured in England to the highest standards. To ensure your new product will give years of trouble free service please carefully read the following instructions. Incorrect installation will affect your warranty. -
Page 4: Weather Protection
Weather Protection The digital controller must be installed within a dry weather proof enclosure or building. Mounting Hole centres for mounting: Wiring Connection Details This equipment must be installed in accordance with the country/regional requirements and regulations. This equipment must be installed by a qualified electrician who will provide a certificate of conformity upon completion of the work. -
Page 5: Wiring Diagram
Remove the four fixing screws and cover to access the cable terminal block for connection of the cables. The cables should be inserted through the cable glands and connected to the terminal block, tighten the cable glands after the connections have been made. NOTE- The pump output is a signal only to override the existing time clock and/ or contactor currently controlling the... -
Page 6: Language Setting
Overview Overview DIGITAL DISPLAY LED INDICATOR BUTTONS Language Setting The factory default setting for the language is English. To change to another language, press the buttons until the desired language appears, press OK to select and save. www.elecro.co.uk... -
Page 7: Set Up Modes
Set Up Modes The Digital controller displays the solar water temperature and the pool water temperature. There are four modes for the set-up of your solar system i.e: • SET WATER TEMPERATURE • ON DIFFERENTIAL TEMPERATURE • OFF DIFFERENTIAL TEMPERATURE •... - Page 8 49 the factory default is 2 ‘Off Differential’ is also the temperature difference between your Thermecro solar array and swimming pool water. When the ‘Off Differential’ value is reached, the electronic stainless steel valve closes, allowing the solar array to begin the heating process again.
-
Page 9: Fill System
Fill System Upon completion of the installation of the Thermecro solar array and pool interface valve, it is necessary to initially fill the array. To fill the solar array press the buttons until ‘Fill System’ mode appears on the display press O.K. this turns the filtration pump and the electronic valve ‘On’... -
Page 10: Operation
Operation The Thermecro digital controller is designed for use with the Themecro pool interface valve to facilitate the harvesting of heat from the solar array in the most efficient way possible. The solar array water temperature and pool water temperature are measured continuously. -
Page 11: Rohs Compliance Statement
RoHS Compliance Statement Elecro Engineering Limited certify that our Thermecro Solar Digital Controller complies in accordance with RoHS Directive 2011/65/EU on the restriction of hazardous substances. Waste of Electrical / Electronic Equipment This product complies with EU directive 2012/19/EU Do Not dispose of this product as unsorted municipal waste. - Page 12 11 Gunnels Wood Park Stevenage Hertfordshire SG1 2BH United Kingdom | f: | e: +44 (0) 1438 749 474 +44 (0) 1438 361 329 sales@elecro.co.uk www.elecro.co.uk © Copyright 2017 Z-INS-SR-DC...
Need help?
Do you have a question about the Thermecro Solar and is the answer not in the manual?
Questions and answers